Multi-objective optimization of fuel injection performance of a common rail injector
Authors:
- 17 January 2023
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 24 (7) , 3282-3296
Abstract
The improvement of injector performance is important for the operation of common rail (CR) fuel systems. In this study, the optimization work has been carried out on a large-flow common rail injector. First, to simulate the injection process, a one-dimensional (1-D) model was developed and validated against the experimental data. The mathematical approximation model was also established to correlate the injection performance with the factors. Then, a multi-objective model by taking three design objectives into account was established and solved. Finally, Pareto front was obtained and the final optimization solution was determined. Furthermore, an extensive validation and analysis for the optimized results under various operating conditions was also carried out. Results shows that the three objectives, total response time, injection pressure fluctuation and injection pressure drop respectively, are improved by 11.75%, 39.12%, and 10.03% under the typical condition. And the proposed multi-objective optimization program based on design of experiment (DOE) technique, response surface methodology (RSM) and Elitist Non-dominated sorting genetic algorithm (NSGA-II) in present work can exhibit a good capability to optimize the problem of the injection performance in a CR fuel system.Keywords
Funding Information
- National Natural Science Foundation of China (52071106)
This publication has 34 references indexed in Scilit:
- Reducing emissions by optimising the fuel injector match with the combustion chamber geometry for a marine medium-speed diesel engineTransportation Research Part D: Transport and Environment, 2017
- Performance –emission optimization of a diesel-hydrogen dual fuel operation: A NSGA II coupled TOPSIS MADM approachEnergy, 2016
- Hydraulic Characterization of Solenoid-actuated Injectors for Diesel Engine Common Rail SystemsEnergy Procedia, 2016
- Response of different injector typologies to dwell time variations and a hydraulic analysis of closely-coupled and continuous rate shaping injection schedulesApplied Energy, 2016
- Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussionEnergy Conversion and Management, 2016
- Model Optimization and Flow Rate Prediction in Electro-injectors of Diesel Injection SystemsIFAC-PapersOnLine, 2016
- The new-generation of solenoid injectors equipped with pressure-balanced pilot valves for energy saving and dynamic response improvementApplied Energy, 2015
- The outlook for fuels for internal combustion enginesInternational Journal of Engine Research, 2014
- A hybrid method of modified NSGA-II and TOPSIS to optimize performance and emissions of a diesel engine using biodieselApplied Thermal Engineering, 2013
- Experimental Investigation of Dynamics Effects on Multiple-Injection Common Rail System PerformanceJournal of Engineering for Gas Turbines and Power, 2008