BETONARME BİNALARIN DEPREM PERFORMANSLARINA DOLGU DUVARLARIN ETKİSİNİN İNCELENMESİ
Authors:
- Özlem ÇavdarÖÇÖzlem Çavdar
- Gülfem KöseGKGülfem Köse
- Fezayil SuncaFSFezayil Sunca
Open Access
- 24 April 2020
- journal article
- research article
- Published by Uludag University Journal of the Faculty of Engineering in Uludağ University Journal of The Faculty of Engineering
- Vol. 25 (1) , 465-484
Abstract
Tr en Bu çalışmada, kat içinde farklı oran ve düzende yerleştirilen dolgu duvarların betonarme binaların sismik davranışlarına olan etkileri araştırılmıştır. Türkiye Bina Deprem Yönetmeliği (TBDY-2018)'ne uygun olarak tasarımı gerçekleştirilen binaların performansları zaman tanım alanında doğrusal olmayan analiz yöntemiyle tespit edilmiştir. Analizler için 11 adet deprem kaydı, yakın ve uzak fay etkileri, depremlerin büyüklüğü, zemin cinsi ve Ülkemizin faylanma mekanizması gibi parametreler dikkate alınarak seçilmiştir. Seçilen ivme kayıtları, basit ölçeklendirme yöntemi kullanılarak TBDY-2018'de verilen yatay elastik tasarım spektrumuyla uyumlu olacak şekilde ölçeklendirilmiştir. Analizlerde 5 farklı oranda dolgu duvar dikkate alınmıştır. Bu dolgu duvarlar diyagonal (eşdeğer) basınç çubuğu olarak analizlerde dikkate alınmıştır. Binanın sonlu eleman modelinde SAP2000, kesit analizlerinde ise RESPONSE2000 programı kullanılmıştır. Analizler sonucunda, her bir dolgu duvar oranı için binalardan elde edilen mod şekilleri, titreşim periyot değerleri, göreli kat ötelemesi oranları ve bina performans seviyeleri karşılaştırmalı olarak sunulmuştur. In this study, the effects of infill walls, which are placed in different ratios and configurations, on the seismic behaviors of reinforced concrete buildings are investigated. The performance levels of the buildings which are designed according to Turkish Building Earthquake Code (TBEC-2018) are determined by using nonlinear time history analysis. For the nonlinear analysis, 11 ground motion records are selected by considering several parameters such as near and far fault effects, the magnitude of earthquakes, soil type and faulting mechanism. The selected ground motion records are scaled by using simple scaling method accordance with the horizontal elastic design spectrum which is defined in TBEC-2018. In the analyses, 5 different infill wall ratios and configurations are taken into consideration and the infill walls are modeled as equivalent compression strut. The SAP2000 program and RESPONSE2000 program are used for the finite element models of the structures and cross-section analysis, respectively. As a result of the analysis, mode shapes, natural period values, interstory drift ratios and building performance levels obtained for the different infill walls ratios are presented comparatively.Keywords
This publication has 15 references indexed in Scilit:
- Effects of Masonry Infill Wall on the Performance of RC Frames to Resist Progressive CollapseJournal of Structural Engineering, 2017
- Performance of buildings with masonry infill walls during the 2011 Lorca earthquakeBulletin of Earthquake Engineering, 2013
- Probabilistic sensitivity analysis of suspension bridges to near-fault ground motionSteel and Composite Structures, 2013
- The effect of short columns on the performance of existing buildingsSTRUCTURAL ENGINEERING AND MECHANICS, 2013
- Appraisal of masonry infill walls effect in the seismic response of RC framed buildings: A case studyEngineering Structures, 2012
- Parameters affecting the fundamental period of RC buildings with infill wallsEngineering Structures, 2009
- The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame — a deterministic assessmentEngineering Structures, 2008
- Shake-table experiment on reinforced concrete structure containing masonry infill wallEarthquake Engineering & Structural Dynamics, 2006
- Three-Strut Model for Concrete Masonry-Infilled Steel FramesJournal of Structural Engineering, 2003
- Modeling of Masonry Infill Panels for Structural AnalysisJournal of Structural Engineering, 1997