Ultrafiltration of oil/water emulsions using PVDF/PC blend membranes
Open Access
- 1 January 2015
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 53 (3) , 569-578
Abstract
Membranes with varying degrees of hydrophilicity made from blends of poly(vinylidene fluoride) (PVDF) and polycarbonate (PC) were prepared to recover water from emulsified oily wastewater. The effects of different amounts of PC content on the structure, hydrophilicity, and functionality of these PVDF/PC membranes were analyzed using contact angle measurements, scanning electron microscope and energy dispersion X-ray analysis, liquid–liquid displacement, and a fouling test with an oil/water emulsion. The slightly hydrophilic character of the PC decreases the hydrophobicity of the blend membranes compared to a pure PVDF membrane. Increasing the amount of PC in the casting solution causes little change in average pore size but a substantial change in the membrane’s porosity and surface structure, with these changes reflected in the efficiency of the membranes with respect to recovering water from the emulsified oily wastewater. The best performance, meaning less membrane fouling and better permeate quality, was obtained using a blend membrane containing 20% PC, which achieved an initial permeate flux of 28.59 L/m2 h with a limiting permeate flux of 22.11 L/m2 h, a COD of 88 ppm in the permeate solution, and 97.8% oil retention.Keywords
This publication has 37 references indexed in Scilit:
- Review of fouling by mixed feeds in membrane filtration applied to water purificationDesalination and Water Treatment, 2011
- The influence of membrane and water properties on fouling during ultrafiltrationDesalination and Water Treatment, 2011
- Progress in the production and modification of PVDF membranesJournal of Membrane Science, 2011
- Effect of additives in the casting solution on the formation of PVDF membranesDesalination, 2006
- Novel porous membranes from chemically modified poly(vinylidene fluoride)Journal of Membrane Science, 2006
- Polyvinylidene fluoride (PVDF) hollow fibre membranes for ammonia removal from waterJournal of Membrane Science, 2006
- Effect of salt additive on the formation of microporous poly(vinylidene fluoride) membranes by phase inversion from LiClO4/Water/DMF/PVDF systemPolymer, 2003
- Membrane characteristics as determinant in fouling of UF membranesSeparation and Purification Technology, 2001
- Effect of PEG additive on membrane formation by phase inversionJournal of Membrane Science, 1998
- Pore formation mechanism of membranes from phase inversion processDesalination, 1995