Dynamic Modeling and Optimization Analysis of Rigid–Flexible Coupling Manipulator Based on Assumed Mode Method
- 15 March 2024
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (05)
Abstract
Lightweight robotic arms are one of the main technologies to improve the working performance of robotic arms in the future. Focusing on the spatial vibrations issue brought about by the light-weighting of a space robotic arm in this paper, a rigid–flexible coupling dynamics model of a space robotic arm system was established based on the assumed mode method and Lagrange method. Based on the lightweight flexible robotic arm structure, a comparative analysis of the first four mode functions was conducted under different fixed constraints and physical properties to determine the mode order that matches the simulation analysis of this robotic arm, thus, further simplifying the rigid–flexible coupling dynamics equations of the system. The overall rigid model and simplified dynamic model of the robotic arm system were solved by using MATLAB, resulting in a motion trajectory of the flexible arm end in space. The three-dimensional model was validated and simulated using virtual prototype technology under the same joint inputs as the model in MATLAB. The simulation results demonstrated that the trajectory of the end of the flexible arm was basically the same between simplified dynamics model simulation and virtual prototype simulation, and the maximum deviation of the end trajectories of the flexible connecting rods [ ] and [ ] was less than 18[ ]mm and 58[ ]mm, respectively. Meanwhile, the trajectory trend of the end of the flexible arm in the two aforementioned models was the same as the simulation results of the ideal model (overall rigid model). The above conclusions can verify the correctness of the mathematical model of dynamics obtained from the calculations in this paper. In addition, the research data showed that the maximum vibration deviation of the flexible arm was stabilized within a certain value range under different joint inputs, and this research also provided theoretical support for the late vibration suppression control of the spatial rigid–flexible coupled robotic arm.Keywords
Funding Information
- National Natural Science Foundation of China (51375297)
This publication has 20 references indexed in Scilit:
- Nonlinear Dynamic and Stability Analysis of an Edge Cracked Rotating Flexible StructureInternational Journal of Structural Stability and Dynamics, 2021
- Dynamic Model and Intelligent Optimal Controller of Flexible Link Manipulator System with Payload UncertaintyArabian Journal for Science and Engineering, 2021
- A review of structures, verification, and calibration technologies of space robotic systems for on-orbit servicingScience China Technological Sciences, 2020
- Computational efficient discrete time transfer matrix method for large deformation analysis of flexible manipulatorsMechanics Based Design of Structures and Machines, 2020
- Neural Network Model for Identifying Workspace, Forward and Inverse Kinematics of the 7-DOF YuMi 14000 ABB Collaborative RobotIFAC-PapersOnLine, 2019
- Optimal design of a beam-based dynamic vibration absorber using fixed-points theoryJournal of Sound and Vibration, 2018
- Double-beam cantilever structure with embedded intelligent damping block: Dynamics and controlJournal of Sound and Vibration, 2017
- Adaptive Nonlinear Boundary Control of a Hybrid Euler–Bernoulli Beam with Coupled Rigid and Flexible DynamicsIranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2017
- Stabilization of Internal Dynamics of Underactuated Systems by Periodic Servo-ConstraintsInternational Journal of Structural Stability and Dynamics, 2016
- Optimal Kinematic Design of 2-DOF Parallel Manipulators With Well-Shaped Workspace Bounded by a Specified Conditioning IndexIEEE Transactions on Robotics and Automation, 2004