Fabrication and characterization of microencapsulated dimethyl adipate phase change material with melamine-formaldehyde shell for cold thermal energy storage in coating
- 14 June 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 43 (7) , 602-612
Abstract
Microencapsulated phase change material (MPCM) was synthesized by using the in-situ polymerization technique. Dimethyl adipate (DMA) and melamine-formaldehyde were used as core and shell material for polymerization respectively. Sodium laureate sulphate (SLS) is used as a surfactant. The thermal properties were characterized by using a differential scanning calorimeter (DSC) and thermogravimetry analysis (TGA). Fourier transform infrared spectroscopy (FT-IR) was used to confirm the chemical structure. The morphology of microcapsules was studied by using, scanning electron microscopy. DSC result of MPCM has been observed to melt at 10.09 °C with melting latent enthalpy 88 J/g and crystallizes at 4.69 °C with crystallization latent heat 89.50 J/g. TGA analysis confirms increases in the thermal stability of MPCM. The decorative coating was prepared with 0, 5, 10, 15, and 20 % MPCM loading, and the prepared paint was tested for pencil hardness, gloss, and stain resistances. The thermal energy transfer rate was used to measure how much time coated panel took to reach the equilibrium temperature of 25 °C. Coating with 20 % MPCM loading revealed good thermal storage capacity but other general coating properties deteriorate.Keywords
Funding Information
- Dr. Babasaheb Ambedkar Research and Training Institute Pune (BANRF-2020/21-22/850)
This publication has 39 references indexed in Scilit:
- Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A reviewRenewable and Sustainable Energy Reviews, 2016
- Preparation, characterization and latent heat thermal energy storage properties of micro-nanoencapsulated fatty acids by polystyrene shellApplied Thermal Engineering, 2014
- Modification and evaluation of thermal properties of melamine-formaldehyde/n-eicosane microcapsules for thermo-regulation applicationsApplied Thermal Engineering, 2014
- Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storageSolar Energy Materials and Solar Cells, 2014
- Phase change materials integrated in building walls: A state of the art reviewRenewable and Sustainable Energy Reviews, 2014
- Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storageSolar Energy Materials and Solar Cells, 2014
- Fabrication and Properties of Microencapsulated Paraffin@SiO2 Phase Change Composite for Thermal Energy StorageACS Sustainable Chemistry & Engineering, 2013
- Synthesis, characterization and thermal properties of novel nanoencapsulated phase change materials for thermal energy storageSolar Energy, 2012
- Heat pipe with PCM for electronic coolingApplied Energy, 2011
- Synthesis and characterization of microcapsules containing Rubitherm®RT27 obtained by spray dryingChemical Engineering Journal, 2011