Fabrication of Atrazine Molecularly Imprinted Polymer Microsphere by Two Step Seed Swelling Polymerization Method
Authors:
- 22 October 2012
- journal article
- research article
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 59 (12) , 1493-1499
Abstract
Atrazine molecularly imprinted polymer microspheres (MIPMs) were fabricated by two step seed swelling polymerization method, using atrazine as a template molecule, methacrylic acid (MAA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent and toluene/dodecanol as a porogenic agent and a series of MIPMs with even particle size of 3‐5 μm and good dispersivity could be obtained under the optimal condition. Equilibrium binding experiments were comparably studied about the binding capacity of the resulted polymers. We packed the polymers into empty chromatographic steel tube columns (2.1 mm I.D. × 10 cm) to prepare liquid chromatographic columns used for the evaluation of specificity with similar structure compounds. The proposed method has been successfully applied to the determination of limited atrazine in water samples. The results showed that a good linear relationship of atrazine was maintained within 0.1‐20 mg/L (r = 0.9992), the sample recovery was in a range of 92.1‐102.0%, with a RSD lower than 5% (n = 6) and a detection limit of 0.041 mg/L.Keywords
This publication has 22 references indexed in Scilit:
- Molecularly imprinted core-shell nanoparticles for determination of trace atrazine by reversible addition–fragmentation chain transfer surface imprintingJournal of Materials Chemistry, 2011
- Study of molecularly imprinted solid-phase extraction of diphenylguanidine and its structural analogsAnalytica Chimica Acta, 2009
- Peptide Imprinted Polymer Nanoparticles: A Plastic AntibodyJournal of the American Chemical Society, 2008
- Cross-Linked, Monodisperse, Micron-Sized Polystyrene Particles by Two-Stage Dispersion PolymerizationMacromolecules, 2005
- Preparation and evaluation of uniform‐sized molecularly imprinted polymer beads used for the separation of sulfamethazineBiomedical Chromatography, 2005
- Chromatographic performance of monodisperse–macroporous particles produced by “modified seeded polymerization.” I: Effect of monomer/seed latex ratioJournal of Applied Polymer Science, 2004
- Comparative study of imprinted polymer particles prepared by different polymerisation methodsAnalytica Chimica Acta, 2004
- Molecularly imprinted polymer films grafted from porous or nonporous silica: Novel affinity stationary phases in capillary electrochromatographyElectrophoresis, 2003
- The development of selective and biocompatible coatings for solid phase microextractionJournal of Separation Science, 2003
- Enzyme-like Catalysis by Molecularly Imprinted PolymersChemical Reviews, 2001