A scenario of core disruptive accident for Japan sodium-cooled fast reactor to achieve in-vessel retention
Authors:
Open Access
- 20 January 2014
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 51 (4) , 493-513
Abstract
As the most promising concept of sodium-cooled fast reactors, the Japan Atomic Energy Agency (JAEA) has selected the advanced loop-type fast reactor, so-called JSFR. The safety design requirements of JSFR for Design Extension Condition (DEC) are the prevention of severe accidents and the mitigation of severe-accident consequences. For the mitigation of severe-accident consequences, in particular, the In-Vessel Retention (IVR) against postulated Core Disruptive Accidents (CDAs) is required. In order to investigate the sufficiency of these safety requirements, a CDA scenario should be constructed, in which the elimination of power excursion and the in-vessel cooling of degraded core materials are evaluated so as to achieve IVR. In the present study, the factors leading to IVR failure were identified by creating phenomenological diagrams, and the effectiveness of design measures against them were evaluated based on experimental data and computer simulations. This is an unprecedented approach to the construction of a CDA scenario, and is an effective method to objectively investigate the factors leading to IVR failure and the design measures against them. It was concluded that mechanical/thermal failures of the reactor vessel due to power-excursion/thermal-load could be avoided by adequate design measures, and a clear vision for achieving IVR was obtained.Keywords
This publication has 12 references indexed in Scilit:
- Safety Strategy of JSFR Eliminating Severe Recriticality Events and Establishing In-Vessel Retention in the Core Disruptive AccidentJournal of Nuclear Science and Technology, 2011
- Three-Pin Cluster CABRI Tests Simulating the Unprotected Loss-of-Flow Accident in Sodium-Cooled Fast ReactorsJournal of Nuclear Science and Technology, 2011
- Development of Passive Shutdown System for SFRNuclear Technology, 2010
- Development of Advanced Loop-Type Fast Reactor in JapanNuclear Technology, 2010
- The result of a wall failure in-pile experiment under the EAGLE projectNuclear Engineering and Design, 2007
- The Development of SIMMER-III, An Advanced Computer Program for LMFR Safety Analysis, and Its Application to Sodium ExperimentsNuclear Technology, 2006
- Transient Fuel Behavior and Failure Condition in the CABRI-2 ExperimentsNuclear Technology, 2004
- Experimental study on simulated molten jet-coolant interactionsNuclear Engineering and Design, 1995
- Pouring of 100-kg-Scale Molten UO2 into SodiumNuclear Technology, 1992
- A Coolability Model for Postaccident Nuclear Reactor DebrisNuclear Technology, 1984