Benefits of Nonaxisymmetric Endwall Contouring in a Compressor Cascade With a Tip Clearance
- 1 May 2015
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 137 (5) , 051101
Abstract
This paper describes the design of a nonaxisymmetric hub contouring in a shroudless axial flow compressor cascade operating at near stall condition. Although an optimum tip clearance (TC) reduces the total pressure loss, further reduction in the loss was achieved using hub contouring. The design methodology presented here combines an evolutionary principle with a three-dimensional (3D) computational fluid dynamics (CFD) flow solver to generate different geometric profiles of the hub systematically. The resulting configurations were preprocessed by GAMBIT© and subsequently analyzed computationally using ANSYS Fluent©. The total pressure loss coefficient was used as a single objective function to guide the search process for the optimum hub geometry. The resulting three dimensionally complex hub promises considerable benefits discussed in detail in this paper. A reduction of 15.2% and 16.23% in the total pressure loss and secondary kinetic energy (SKE), respectively, is achieved in the wake region. An improvement of 4.53% in the blade loading is observed. Other complimentary benefits are also listed in the paper. The majority of the benefits are obtained away from the hub region. The contoured hub not only alters the pitchwise static pressure gradient but also acts as a vortex generator in an effort to alleviate the total pressure loss. The results confirm that nonaxisymmetric contouring is an effective method for reducing the losses and thereby improving the performance of the cascade.Keywords
This publication has 8 references indexed in Scilit:
- Numerical investigation of a high-subsonic axial-flow compressor rotor with non-axisymmetric hub endwallJournal of Thermal Science, 2010
- Measurements of Secondary Losses in a Turbine Cascade With the Implementation of Nonaxisymmetric Endwall ContouringJournal of Turbomachinery, 2009
- Interaction of Tip Clearance Flow and Three-Dimensional Separations in Axial CompressorsJournal of Turbomachinery, 2006
- The benefits of turbine endwall profiling in a cascadeProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005
- Investigation of a Novel Secondary Flow Feature in a Turbine Cascade With End Wall ProfilingJournal of Turbomachinery, 2005
- Nonaxisymmetric Turbine End Wall Design: Part I— Three-Dimensional Linear Design SystemJournal of Turbomachinery, 1999
- Nonaxisymmetric Turbine End Wall Design: Part II—Experimental ValidationJournal of Turbomachinery, 1999
- A review of turbomachinery tip gap effectsInternational Journal of Heat and Fluid Flow, 1982