Ultralow-Loss and Broadband Micromachined Transmission Line Inductors for 30–60 GHz CMOS RFIC Applications
Authors:
- Chi-Chen ChenCCChi-Chen Chen
- Pen-Li HuangPHPen-Li Huang
- Tao WangTWTao Wang
- Guo-Wei HuangGHGuo-Wei Huang
- Shey-Shi LuSLShey-Shi Lu
- 27 August 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 54 (9) , 2512-2519
Abstract
In this paper, for the first time, we demonstrate that ultralow-loss and broadband transmission line (TL) inductors can be obtained by using the CMOS-process compatible backside inductively coupled-plasma (ICP) deep-trench technology to selectively remove the silicon underneath the TL inductors. The results show that a 112.8% (from 14.37 to 30.58) and a 201.1% (from 6.33 to 19.06) increase in Q-factor, a 9.7% (from 0.91 to 0.998) and a 28.3% (from 0.778 to 0.998) increase in maximum available power gain GAmax, and a 0.404-dB (from 0.412 to 7.6times10-3 dB) and a 1.082-dB (from 1.09 to 8.4times10-3 dB) reduction in minimum noise figure NFmin were achieved at 30 and 60 GHz, respectively, for a 162.2 pH TL inductor after the backside ICP dry etching. The state-of-the-art performances of the on-chip TL inductors-on-air suggest that they are very suitable for application to realize ultralow-noise 30-60-GHz CMOS radio-frequency integrated circuit. In addition, the CMOS-process compatible backside ICP etching technique is very promising for system-on-a-chip applications.Keywords
This publication has 21 references indexed in Scilit:
- An analysis of perfect-magnetic-coupling ultra-low-loss micromachined SMIS RF transformers for RFIC applications2006
- De-embedding transmission line measurements for accurate modeling of IC designsIEEE Transactions on Electron Devices, 2006
- A 2.17-dB NF 5-GHz-band monolithic CMOS LNA with 10-mW DC power consumptionIEEE Transactions on Microwave Theory and Techniques, 2005
- A 3.5 mW 2.5 GHz diversity receiver and a 1.2 mW 3.6 GHz VCO in silicon-on-anything2002
- A 5 GHz band CMOS low noise amplifier with a 2.5 dB noise figure2002
- Micromachined high-Q inductors in a 0.18-μm copper interconnect low-k dielectric CMOS processIEEE Journal of Solid-State Circuits, 2002
- Substrate effects in monolithic RF transformers on siliconIEEE Transactions on Microwave Theory and Techniques, 2002
- Spiral inductors on Si p/p/sup +/ substrates with resonant frequency of 20 GHzIEEE Electron Device Letters, 2001
- Micromachined microwave planar spiral inductors and transformersIEEE Transactions on Microwave Theory and Techniques, 2000
- An approach for fabricating high-performance inductors on low-resistivity substratesIEEE Journal of Solid-State Circuits, 1998