MoS2 Synthesized by Atomic Layer Deposition as Cu Diffusion Barrier
Authors:
- Johanna (Sanne) H. DeijkersJDJohanna (Sanne) H. Deijkers
- Arthur A. de JongAJArthur A. de Jong
- Miika J. MattinenMMMiika J. Mattinen
- Jeff J. P. M. SchulpenJSJeff J. P. M. Schulpen
- Marcel A. VerheijenMVMarcel A. Verheijen
- Wilhelmus (Erwin) M. M. KesselsWKWilhelmus (Erwin) M. M. Kessels
- Ageeth A. BolABAgeeth A. Bol
- Adriaan J. M. MackusAMAdriaan J. M. Mackus
Open Access
- 27 March 2023
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (12)
Abstract
Miniaturization in integrated circuits requires that the Cu diffusion barriers located in interconnects between the Cu metal line and the dielectric material should scale down. Replacing the conventional TaN with a 2D transition metal dichalcogenide barrier potentially offers the opportunity to scale to 1–2 nm thick barriers. In this article, it is demonstrated that MoS2 synthesized by atomic layer deposition (ALD) can be employed as a Cu diffusion barrier. ALD offers a controlled growth process at back‐end‐of‐line (BEOL) compatible temperatures. MoS2 films of different thicknesses (i.e., 2.2, 4.3, and 6.5 nm) are tested by time‐dependent dielectric breakdown (TDDB) measurements, demonstrating that ALD‐grown MoS2 can enhance dielectric lifetime by a factor up to 17 at an electric field of 7 MV cm−1. Extrapolation to lower E‐fields shows that the MoS2 barriers prepared by ALD have at least an order of magnitude higher median‐time‐to‐failure during device operation at 0.5 MV cm−1 compared with MoS2 barriers prepared by other methods. By scaling the thickness further down in future work, the ALD MoS2 films can be applied as ultrathin Cu diffusion barriers.Keywords
Funding Information
- ASM International
This publication has 30 references indexed in Scilit:
- Mass Transport Mechanism of Cu Species at the Metal/Dielectric Interfaces with a Graphene BarrierACS Nano, 2014
- Advanced Interconnects: Materials, Processing, and ReliabilityECS Journal of Solid State Science and Technology, 2014
- Review of plasma-enhanced atomic layer deposition: Technical enabler of nanoscale device fabricationJapanese Journal of Applied Physics, 2014
- 1-nm-thick graphene tri-layer as the ultimate copper diffusion barrierApplied Physics Letters, 2014
- Deposition of TiN and TaN by Remote Plasma ALD for Cu and Li Diffusion Barrier ApplicationsJournal of the Electrochemical Society, 2008
- Reliability analysis method for low-k interconnect dielectrics breakdown in integrated circuitsJournal of Applied Physics, 2005
- TiN, TaN and WxN as diffusion barriers for Cu on SiO2: capacitance–voltage, leakage current, and triangular-voltage-sweep tests after bias temperature stressThin Solid Films, 2004
- Structure and thermal stability of graded Ta–TaN diffusion barriers between Cu and SiO2Thin Solid Films, 2003
- Comparative study of tantalum and tantalum nitrides (Ta2N and TaN) as a diffusion barrier for Cu metallizationJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1996
- Estimating the cumulative probability of failure data points to be plotted on Weibull and other probability paperIEEE Transactions on Electrical Insulation, 1990