Hydrogen embrittlement of Ni‐Ti superelastic alloy in fluoride solution
- 7 March 2003
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 65A (2) , 182-187
Abstract
Hydrogen embrittlement of Ni‐Ti superelastic alloy in a fluoride solution (0.2% APF) has been investigated by means of a tensile test (after immersion) and hydrogen thermal desorption analysis. Upon immersion, the tensile strength of the alloy decreased to the critical stress level of martensite transformation. Hydrogen desorption of the immersed specimens appeared with a peak at around 500°C. The amount of absorbed hydrogen in the alloy ranged from 100 to 1000 mass ppm when immersed in the fluoride solution for 2 to 24 h. The immersion in the fluoride solution led to the degradation of mechanical properties due to hydrogen embrittlement. The results of the present study imply that one reason that Ti and its alloys fracture in the oral cavity is the fact that hydrogen is absorbed in a fluoride solution, such as prophylactic agents. © 2003 Wiley Periodicals, Inc. J Biomed Mater Res 65A: 182–187, 2003Keywords
This publication has 27 references indexed in Scilit:
- Degradation and fracture of Ni–Ti superelastic wire in an oral cavityBiomaterials, 2001
- Accelerated failure in high strength steel by alternating hydrogen-charging potentialScripta Materialia, 2001
- Fracture Analysis of Hydrogen-Charged Nickel-Titanium Superelastic AlloyMATERIALS TRANSACTIONS, 2001
- Surface characterization of retrieved NiTi orthodontic archwiresEuropean Journal of Orthodontics, 2000
- Electrochemical and surface characterization of a nickel–titanium alloyBiomaterials, 1998
- The overwet phenomenon in two-component acetone-based primers containing aryl amine and car☐ylic acid monomersDental Materials, 1997
- Corrosive properties of fluoride-containing odontologic gels against titaniumJournal of Dentistry, 1996
- Nitinol arch wire in a simulated oral environment. Changes in mechanical propertiesAmerican Journal of Orthodontics and Dentofacial Orthopedics, 1988
- Accelerated oxide growth on titanium implants during autoclaving caused by fluorine contaminationBiomaterials, 1985
- Transformation pseudoelasticity and deformation behavior in a Ti-50.6at%Ni alloyScripta Metallurgica, 1981