Energy-absorption optimisation of locomotives and scaled equivalent model validation
- 9 January 2017
- journal article
- research article
- Published by Taylor & Francis in International Journal of Crashworthiness
- Vol. 22 (4) , 441-452
Abstract
In order to improve crashworthiness, the optimum energy-absorption design of locomotives was performed in MADYMO multibody dynamics software, and a three-dimensional computational model for locomotive vehicles was built. The results of calculations using the model were then fitted by multiple linear-regression functions, and a scaled equivalent model test was carried out to validate the fitting formula results. The results showed how to influence the energy absorption of a locomotive by studying the mass and velocity of the locomotive, as well as the plastic deformation platform force of the middle car's crushing tube. The fitting formula related to the plastic deformation platform force of the crushing of the middle car's tube and the kinetic energy of the locomotive was also obtained. The fitting accuracy of the model was 99.98%, and the error between the calculation results from the fitting formula and the scaled equivalent model test results was less than 5%. These results reveal the mode of energy dissipation, and they can be applied to the preliminary conceptual design of train. The dynamic tests of prototype are essential before serial production.Keywords
Funding Information
- National Support Program of China (2015BAG12B01, 2015BAG13B01-05)
- National Natural Science Foundation of China (U1334208, 51675537, 51405516)
- Natural Science Foundation of Hunan (2015JJ3155)
This publication has 8 references indexed in Scilit:
- Locomotive Crash Energy Management Test Plans2015
- Analysis of train driver protection in rail collisions: Part I. Evaluation of injury outcome for train driver in desk impactInternational Journal of Crashworthiness, 2013
- Train's crashworthiness design and collision analysisInternational Journal of Crashworthiness, 2007
- The Influence of Train Type, Car Weight, and Train Length on Passenger Train Crashworthiness2005
- Fullscale Two-Car Impact Test: A Comparison of Measured and Model Results2004
- US rail equipment crashworthiness standardsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2002
- Energy absorption requirement for crashworthy vehiclesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2002
- Impact Behaviour of Small Scale Model Motor CoachesProceedings of the Institution of Mechanical Engineers, 1972