Determination of Optimal Measurement Points for Calibration Equations—Examples by RH Sensors
Open Access
Abstract
The calibration points for sensors must be selected carefully. This study uses accuracy and precision as the criteria to evaluate the required numbers of calibration points required. Two types of electric relative humidity (RH) sensors were used to illustrate the method and the standard RH environments were maintained using different saturated salt solutions. The best calibration equation is determined according to the t-value for the highest-order parameter and using the residual plots. Then, the estimated standard errors for the regression equation are used to determine the accuracy of the sensors. The combined uncertainties from the calibration equations for different calibration points for the different saturated salt solutions were then used to evaluate the precision of the sensors. The accuracy of the calibration equations is 0.8% RH for a resistive humidity sensor using 7 calibration points and 0.7% RH for a capacitance humidity sensor using 5 calibration points. The precision is less than 1.0% RH for a resistive sensor and less than 0.9% RH for a capacitive sensor. The method that this study proposed for the selection of calibration points can be applied to other sensors.Keywords
This publication has 21 references indexed in Scilit:
- Relationship between Water Activity and Moisture Content in Floral HoneyFoods, 2019
- Use of Modern Regression Analysis in Liver Volume PredictionJournal of Medical Imaging and Health Informatics, 2017
- Sensor Calibration Design Based on D-Optimality CriterionMetrology and Measurement Systems, 2016
- Application of growth models to evaluate the microenvironmental conditions using tissue culture plantlets of Phalaenopsis Sogo Yukidian ‘V3’Scientia Horticulturae, 2015
- Evaluation of Piecewise Polynomial Equations for Two Types of ThermocouplesSensors, 2013
- Determination of optimum measurement points via A-optimality criterion for the calibration of measurement apparatusMeasurement, 2010
- Evaluation of resistance–temperature calibration equations for NTC thermistorsMeasurement, 2009
- Evaluation of measurement uncertainty for thermometers with calibration equationsAccreditation and Quality Assurance, 2006
- Experimental design techniques for optimising measurement chain calibrationMeasurement, 2001
- Optimum choice of measurement points for sensor calibrationMeasurement, 1996