An Ultrathin and Polarization-Insensitive Frequency Selective Surface at Ka-Band
Open Access
- 20 November 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 17 (1) , 74-77
Abstract
In this work, an ultra-thin frequency selective surface is developed with a square unit cell loaded with three ring slot pairs. The outer ring slot pair is loaded with metal shorts It achieves one polarization-insensitive passband with sharp transition at Ka-band. The design is verified with full-wave simulated results, as well as the measured results. The fabricated FSS has a flat passband and its measured 3-dB bandwidth is from 33 GHz to 37.5 GHz. A complete angular stability study of the FSS has been conducted. Meanwhile, it can directly attach to the aperture of the horn antenna to lower the whole profile of FSS-antenna configuration. Working as a radome, this FSS can be a good candidate for radar communications and radar cross section reduction in radar stealth research area at Ka-band.Keywords
Funding Information
- National Natural Science Foundation of China (61302017)
This publication has 6 references indexed in Scilit:
- Angular Stability of Metasurfaces: Challenges Regarding Reflectivity Measurements [Measurements Corner]IEEE Antennas and Propagation Magazine, 2016
- Closely spaced tri‐band frequency selective surfaces based on split ring slotsElectronics Letters, 2016
- A Miniaturized Dual-Band FSS With Second-Order Response and Large Band SeparationIEEE Antennas and Wireless Propagation Letters, 2015
- Microstrip Filters for RF/Microwave Applications2001
- Frequency selective surfaces based on shorted ringslotsElectronics Letters, 2001
- Tri-band frequency selective surface with circular ring elementsIEEE Transactions on Antennas and Propagation, 1994