Effect of Carbide Distribution on the Grain Refinement in the Steel for Large‐Size Bearing Ring
Authors:
- 17 July 2015
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 87 (6) , 745-751
Abstract
The effect of carbide distribution on the grain refinement in the steel for large‐size bearing ring is investigated. It is observed that Ni‐containing steel has an obvious grain refinement below 1050 °C, whereas its grain growth trend is steeper than that of Ni‐free steel above 1050 °C. No evident segregation of Ni is observed, whereas the pinning effect of carbides distributed along grain boundaries is advantageous for the grain refinement. It is found that Ni addition could affect the type of carbides and contribute to decreasing the size of carbides via accelerating the diffusion of carbon. A stronger pinning effect with smaller carbides distributed along grain boundaries could be obtained, which is beneficial to grain refinement with Ni addition in small amounts.Keywords
This publication has 22 references indexed in Scilit:
- Prediction model for the austenite grain growth in medium carbon alloy steel 42CrMoMetallurgical Research & Technology, 2014
- Isochronal Phase Transformations of Low‐Carbon High Strength Low Alloy Steel upon Continuous CoolingSteel Research International, 2012
- Electro-hydraulic proportional control of thrust system for shield tunneling machineAutomation in Construction, 2009
- Effect of nitrogen and vanadium on austenite grain growth kinetics of a low alloy steelMaterials Characterization, 2006
- Effect of grain refinement on fracture toughness in extruded pure magnesiumScripta Materialia, 2005
- Hydrogen degradation of a boron-bearing steel with 1050 and 1300MPa strength levelsScripta Materialia, 2005
- A Microstructural Study of Destabilised 30wt%Cr-2.3wt%C High Chromium Cast IronISIJ International, 2004
- Some current development trends in metal-forming technologyJournal of Materials Processing Technology, 1996
- Evaluation of the corrosion and mechanical properties of a range of experimental CrMn stainless steelsMaterials Science and Engineering: A, 1995
- Rolling contact deformation, etching effects, and failure of high-strength bearing steelMetallurgical Transactions A, 1990