Study on mechanical properties of perlite‐filled gamma‐irradiated polypropylene
Authors:
- 19 June 2001
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 81 (11) , 2670-2678
Abstract
This study covers the preparation and characterization of perlite‐filled polypropylene (PP). The compositions of 15, 30, and 50 % by weight perlite–PP composites were prepared by melt‐mixing. The PP used in this study was either applied in the virgin form or γ‐irradiated in air at the doses of 10, 25, 50, and 100 kGy to determine the effect of oxidative degradation in composite properties. Furthermore, the active sites containing oxygen produced by γ‐irradiation in PP may provide a possible enhancement by the interfacial interaction between perlite and PP. An initial sharp drop in torque readings during the melt‐mixing of perlite–PP composite preparation indicated an extensive chain scission and degradation by γ‐irradiation. The thermal properties of the composites were characterized by DSC. The ultimate tensile strength and elongation and also impact strength decreased in all composites with γ‐irradiation. Yet, these changes appeared not to be faster than was the change in unfilled PP upon irradiation. Scanning electron microscopy revealed an interfacial adhesion between perlite and irradiated PP while virgin PP did not show any evidence of adhesion. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2670–2678, 2001Keywords
This publication has 14 references indexed in Scilit:
- Crystallization behavior of polypropylene filled with surface-modified talcJournal of Applied Polymer Science, 1996
- Preparation and characterization of perlite‐filled high‐density polyethylenes. II. Thermal and flow propertiesJournal of Applied Polymer Science, 1994
- Preparation and characterization of perlite‐filled high‐density polyethylenes. I. Mechanical propertiesJournal of Applied Polymer Science, 1994
- Functional Modification of PolypropyleneJournal of Macromolecular Science, Part C: Polymer Reviews, 1994
- A study on the yield stress of perlite-filled high-density polyethylenesJournal of Materials Science, 1993
- Mechanical and rheological properties of reinforced polyethylenePolymer Composites, 1992
- Interfacial role and properties in model composites: Fracture surfaces by scanning electron microscopyJournal of Materials Science, 1989
- Mechanical properties of particulate filled polymersPolymer Composites, 1987
- Radiation‐induced oxidative degradation of isotactic polypropyleneJournal of Applied Polymer Science, 1981
- A rheological interpretation of torque‐rheometer dataPolymer Engineering & Science, 1967