On the pyrotechnic ignitors role in dust explosion testing: Comparison between 20 L and 1 m3 explosion vessels
Open Access
- 1 April 2021
- journal article
- research article
- Published by Wiley in Process Safety Progress
- Vol. 40 (4) , 289-295
Abstract
Several phenomena (e.g., initial turbulence level, overdriving, underdriving, etc.) affect the measurement of dust explosion parameters in the 20 L and 1 m3 standard test vessels. Estimating the role of each phenomenon is crucial to understand the discrepancies observed over the years between the data collected using these vessels. In this work, we focus on the role of the pyrotechnic ignitors on the pressure trend and the temperature distribution. We run explosion tests in the 20 L vessel to measure the pressure–time history generated by the explosion of pyrotechnic ignitors. Moreover, we performed CFD simulations to simulate the spatial/temporal evolution of the temperature map from the hot core due to the igniter explosion toward the vessel walls. The explosion of the pyrotechnic ignitors shows a significant increase of pressure in the 20 L vessel, suggesting that flame propagation is occurring inside the vessel. Furthermore, the localized increase of temperature due to the ignitor explosions, diffuse, and then uniformize much more rapidly in the 20 L vessel than in the 1 m3 vessel. The flame propagation generated by the ignitors is very relevant in the 20 L sphere leading to the overdriving phenomenon. This result justifies the fact that for many organic dusts, the deflagration index values measured in the 20 L are much higher than those measured in the 1 m3 vessel. CFD simulations show that the hot core generated by the ignitors dissipate much faster in the 20 L vessel than in the 1 m3 vessel, due to the higher turbulence level of the smaller vessel. Therefore, dusts whose combustion is controlled by particle heating are more prone to sustain combustion in the 1 m3 than in the 20 L vessel.Keywords
This publication has 18 references indexed in Scilit:
- Effect of ignition on the explosion behavior of 1-Octadecanol/air mixturesPowder Technology, 2013
- CFD simulations of turbulent fluid flow and dust dispersion in the 20 liter explosion vesselAIChE Journal, 2013
- Combined Effect of Ignition Energy and Initial Turbulence on the Explosion Behavior of Lean Gas/Dust-Air MixturesIndustrial & Engineering Chemistry Research, 2011
- Practical issues with marginally explosible dusts—evaluating the real hazardProcess Safety Progress, 2011
- Measuring the violence of dust explosions with the “20l sphere” and with the standard “ISO 1m3 vessel”Journal of Loss Prevention in the Process Industries, 2007
- Flammability limit measurements for dusts in 20-L and 1-m3 vesselsJournal of Loss Prevention in the Process Industries, 2000
- Overview of dust explosibility characteristicsJournal of Loss Prevention in the Process Industries, 2000
- Dust explosions in spherical vessels: The role of flame thickness in the validity of the ‘cube-root law’Journal of Loss Prevention in the Process Industries, 1996
- Problems in experimental measurements of dust explosionsJournal of Hazardous Materials, 1995
- Minimum Explosible Dust Concentrations Measured in 20-L and 1-M3ChambersCombustion Science and Technology, 1993