Effect of repeated hydrothermal cycling on the durability of glass fiber/epoxy composites with and without carbon nanotube reinforcement
- 4 September 2021
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 42 (11) , 6160-6172
Abstract
Enhancing the performance of polymeric composites by incorporating carbon nanotube (CNT) is a current research trend. In this article, the performance of glass fiber reinforced epoxy (GE) composite with and without CNT has been observed under repeated hydrothermal cycling (HC) between 15 and 50°C water baths. Before carrying out the HC, the optimum concentration of CNT in the GE composite was obtained by flexural test. This study first confirms that the addition of 0.1 wt% of CNTs resulted in a 6.68% and 6.47% increment in flexural strength and modulus compared to neat GE composite. Alteration in the performance of the neat GE and 0.1 wt% CNT‐GE was then analyzed after performing HC for 20, 40, and 60 cycles by conducting mechanical (flexural), thermomechanical (dynamic mechanical thermal analysis [DMA]), chemical (Fourier transform infrared spectroscopy [FTIR]) and fractographic (scanning electron microscopy [SEM]) analysis. Degradation in the mechanical performance of the CNT embedded GE composite was found to be faster than the neat one with the increasing number of HC. The possible reason has been explained based on the evidence obtained from DMA, FTIR, and SEM analysis.Keywords
Funding Information
- Defence Research and Development Organisation (NRB‐383/MAT/16‐17)
- National Institute of Technology Rourkela
This publication has 64 references indexed in Scilit:
- Long‐term hygrothermal response of perforated GFRP plates with/without application of constant external loadingPolymer Composites, 2012
- Effect of the addition of modified mica on mechanical and durability properties of FRP composite materials for civil engineeringPolymer Composites, 2011
- Performance Evaluation of Treated—Untreated Jute—Carbon and Glass—Carbon Hybrid Composites of Bisphenol-C based Mixed Epoxy—Phenolic ResinsJournal of Reinforced Plastics and Composites, 2008
- Development of an epoxy system characterized by low water absorption and high thermomechanical performancesJournal of Applied Polymer Science, 2006
- Structure and thermal expansion of multi-walled carbon nanotubes before and after high temperature treatmentJournal of Physics D: Applied Physics, 2005
- Testing and evaluation on the thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxyMaterials Science and Engineering: A, 2005
- Durability and environmental degradation of glass‐vinylester compositesPolymer Composites, 2004
- Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part A: Moisture Absorption CharacteristicsJournal of Reinforced Plastics and Composites, 2002
- Sorption and diffusion of water in glass ribbon-reinforced compositesJournal of Applied Polymer Science, 1977
- Moisture Effects in Epoxy Matrix Composites1977