Linear magnetorheological brake with serpentine flux path as a high force and low off-state friction actuator for haptics
Authors:
- 5 April 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 24 (14) , 1699-1713
Abstract
In robotics and haptics, actuators that are capable of high force output with compact size are desired for stable and stiff interfaces. Magnetorheological brakes are viable options for such implementations since they have large force-to-volume ratios. Existing linear magnetorheological brakes have limited strokes, are relatively large, and have high off-state friction forces mainly due to the piston-cylinder internal design. The main contribution of this research is a new alternative internal design for linear magnetorheological brakes. The proposed approach uses the serpentine flux path concept to eliminate the piston-cylinder arrangement. It leads to significantly less off-state friction and infinite stroke. To the best of our knowledge, this is the first such linear magnetorheological brake. Our new brake can produce 173-N force. In comparison, a conventional linear magnetorheological brake with the same size can only produce about 27-N force. Our results showed that the ratio of the off-state friction force to the maximum force output in the prototype linear brake is about 3% compared with more than 10% for most similar devices in the literature and 27% for a commercial brake. At the same time, the compactness was improved as our prototype is about half the size of a commercially available product.Keywords
This publication has 11 references indexed in Scilit:
- Magnetic induction control with embedded sensor for elimination of hysteresis in magnetorheological brakesJournal of Intelligent Material Systems and Structures, 2012
- Interactive design optimization of magnetorheological-brake actuators using the Taguchi methodSmart Materials and Structures, 2011
- Serpentine flux path for high torque MRF brakes in haptics applicationsMechatronics, 2010
- Haptic Glove With MR Brakes for Virtual RealityIEEE/ASME Transactions on Mechatronics, 2009
- Experimental investigation into magnetorheological damper subjected to impact loadsTransactions of Tianjin University, 2008
- Stability and Performance of Haptic Interfaces with Active/Passive Actuators—Theory and ExperimentsThe International Journal of Robotics Research, 2006
- A new dynamic hysteresis model for magnetorheological dampersSmart Materials and Structures, 2006
- Volume-constrained optimization of magnetorheological and electrorheological valves and dampersSmart Materials and Structures, 2004
- Investigation and control of magneto–rheological fluid dampersInternational Journal of Machine Tools and Manufacture, 2001
- Testing and steady state modeling of a linear MR damper under sinusoidal loadingSmart Materials and Structures, 2000