Abstract
To disclose the impact of SF 6 gaseous medium on Ag/Ti 3 SiC 2 contact materials, arc discharges on the Ag/Ti 3 SiC 2 cathodes were performed 100 times in SF 6 gas at 10 kV. After 1, 50, and 100 times of arc discharges, the morphologies of arc‐eroded surfaces were characterized. The changes in breakdown strength with the number of tests were recorded. After 100 times of arc erosion, the composition of the surface was characterized, and the morphologies and compositions of the cross section were measured. In the process of multiple arc breakdowns, the arc erosion position randomly changes. In the later stage of tests, the breakdown strength of Ag/Ti 3 SiC 2 increased. The protrusion on the arc‐eroded surface is the ignition point for the arc, the down of protrusion height and the smooth of protrusion tip were observed after multiple arc discharges, which may result in the increase in breakdown strength. After multiple arc erosion tests, Ag 2 S was detected on the surface by XPS, and part of silicon elements were dissociated outward from Ti 3 SiC 2 . The composition change is inferred to be one of the reasons for the rise of breakdown strength.
Funding Information
  • Natural Science Foundation of Anhui Province (1808085ME122)
  • National Natural Science Foundation of China (51571078, 51871085)

This publication has 43 references indexed in Scilit: