Temperature effects on PD statistics and endurance of inverter-fed motor insulation under repetitive square wave voltages
Authors:
- 1 June 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 202-205
Abstract
To study the influence of temperature on partial discharge (PD) statistics and endurance of inverter-fed motor insulation, experiments were carried out focusing on enameled wires tested under bipolar repetitive square wave voltages at different temperatures. The PD pattern, delay time, amplitude and life were obtaiaed according to a large amount of test results. Experimental results show that the influence of temperature on PD features depends significantly on the voltage frequency. At low frequency, higher temperature will give rise to more PD events with longer delay time and higher magnitude. At higher frequencies the behavior is significantly different, and the influence of temperature on PD features can be neglected. The endurance test results performed at 10 kHz indicate that, at ambient temperature, PD would be the dominant factor causing insulation breakdown, while at high temperature, the thermal aging plays an important role on the breakdown process and time.Keywords
This publication has 15 references indexed in Scilit:
- Study on accumulation mechanism of space charge in covering insulating material for motor windings2014
- Partial Discharge Phenomenology and Induced Aging Behavior in Rotating Machines Controlled by Power ElectronicsIEEE Transactions on Industrial Electronics, 2014
- Effect of rise time on PD pulse features under repetitive square wave voltagesIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Estimation of partial discharge inception voltage of magnet wires under inverter surge voltage by volume-time theoryIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Effect of voltage reversal on space charge and transient field in LDPE films under temperature gradientIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Time variation of partial discharge activity leading to breakdown of magnet wire under repetitive surge voltage applicationIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Effects of ambient humidity and temperature on partial discharge characteristics of conventional and nanocomposite enameled magnet wiresIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Technical Development on Partial Discharge Measurement and Electrical Insulation Techniques for Low Voltage Motors Driven by Voltage InvertersIEEE Transactions on Dielectrics and Electrical Insulation, 2007
- A general multi-stress life model for insulating materials with or without evidence for thresholdsIEEE Transactions on Electrical Insulation, 1993
- Aging phenomenology and modelingIEEE Transactions on Electrical Insulation, 1993