Rheology of Crosslinked Foams
Authors:
- 1 May 1996
- journal article
- Published by Society of Petroleum Engineers (SPE) in SPE Production & Facilities
- Vol. 11 (02) , 113-116
Abstract
Summary: The rheology of foam fracturing fluids has been previously described as a yield-pseudoplastic fluid for a broad range of qualities, linear gel concentrations, and temperatures. With the increased use of foams for fracturing with higher proppant concentrations, crosslinking agents are often added. Because the viscous character of the external phase of the foam strongly influences the viscous properties of the foam, the viscosity of the foam will increase if the external phase is crosslinked. Rheological properties of 25%- to 75%-quality N2 foams containing borate-crosslinked guar were measured on the recirculating flow-loop viscometer at temperatures from 75 to 300°F. When polymer was crosslinked in the foam, viscosity increased by factors of 3 to 10 or more over foams that contained only linear gel. The fluid viscosity developed in a foam is a product of gas quality, external phase fluid viscosity, and crosslinking of the polymer in the external phase. The extent to which each of these factors is important depends upon both the quality and the concentration of the crosslinked polymer. Viscosity resulting from borate crosslinking is a stronger factor than either quality or linear polymer concentration. Borate crosslinking influence is greatest at low quality and at high polymer concentration.Keywords
This publication has 9 references indexed in Scilit:
- A Comparison of Mixed-Gas Foams with N2 and CO2 Foam Fracturing Fluids on a Flow-Loop ViscometerSPE Production & Facilities, 1995
- Chemistry and Rheology of Borate-Crosslinked Fluids at Temperatures to 300FJournal of Petroleum Technology, 1993
- Application of Foam Fluids To Minimize Damage During Fracturing1992
- Effects of Texture on Rheology of Foam Fracturing FluidsSPE Production Engineering, 1989
- High-Temperature Rheological Study of Foam Fracturing FluidsJournal of Petroleum Technology, 1987
- Rheological Study of Foam Fracturing Fluids Using Nitrogen and Carbon DioxideSPE Production Engineering, 1986
- Foam Fracturing Utilizing Delayed Crosslinked Gels1985
- A New Crosslinked Foamed Fracturing Fluid1983
- Formation Fracturing with Foam1974