Using Polyolefin Fibers with Moderate-Strength Concrete Matrix to Improve Ductility
- 1 September 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (9)
Abstract
Research has shown that polyolefin fiber–reinforced concrete (PFRC) can meet the requirements of standards in terms of the contributions of fiber in structural design. Such results were obtained with fibers embedded in high-performance concrete matrixes. Given that the precracking maximum strength is mainly governed by the matrix properties, a moderate-strength concrete matrix could lead to a reduction in the initial drop of strength after the limit of proportionality. Nevertheless, it was necessary to determine whether residual postcracking behavior would be similar in a poorer matrix. In this study, a moderate-strength concrete matrix with two dosages of polyolefin fibers was produced. The flexural tensile tests showed that it maintained its residual strength and reduced brittleness. All the concrete types tested met the requirements provided in the relevant standards. The study also provides a large comparison with residual strengths found in the literature showing that the contributions of polyolefin fibers were analogous to those cases in which the fibers were embedded in high-performance concrete matrixes. Hence, PFRC is well suited for use in constructive elements designed with low requirements in terms of concrete matrix properties.Keywords
This publication has 28 references indexed in Scilit:
- Structural Cast-in-Place Application of Polyolefin Fiber–Reinforced Concrete in a Water Pipeline Supporting ElementsJournal of Pipeline Systems Engineering and Practice, 2017
- On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concreteCement and Concrete Composites, 2017
- Fibre distribution and orientation of macro-synthetic polyolefin fibre reinforced concrete elementsConstruction and Building Materials, 2016
- Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixesConstruction and Building Materials, 2016
- Reliability of polyolefin fibre reinforced concrete beyond laboratory sizes and construction proceduresComposite Structures, 2016
- High-performance fiber-reinforced concrete: a reviewJournal of Materials Science, 2016
- Fracture mechanics of polyolefin fibre reinforced concrete: Study of the influence of the concrete properties, casting procedures, the fibre length and specimen sizeEngineering Fracture Mechanics, 2016
- Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concreteConstruction and Building Materials, 2015
- On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concreteConstruction and Building Materials, 2014
- Mechanical properties of a large scale synthetic fibre reinforced concrete ground slabConstruction and Building Materials, 2013