Influence of the Field and the Current Limit on Flash Sintering at Isothermal Furnace Temperatures
Authors:
Top Cited Papers
- 12 July 2013
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 96 (9) , 2754-2758
Abstract
We report, for the first time, the observation of an incubation time for the onset of flash sintering in experiments carried out at isothermal furnace temperatures. The incubation time varies highly nonlinearly with the strength of the DC field, akin to a nucleation‐like phenomenon. The setting of the maximum current at the power supply has a significant influence on the extent of densification. The hold time at these current settings has an influence on the grain size increasing it with time and the magnitude of the current setting. The experiments were carried out on 3 mol% yttria‐stabilized zirconia. In all instances the specimen temperatures during flash sintering, estimated from a previously validated blackbody radiation model remain well below the temperatures that would be required for conventional sintering of yttria‐stabilized zirconia. Taken together these observations imply a nucleation of defect avalanche as a possible mechanism for flash sintering.Keywords
Funding Information
- Basic Science Division of the Department of Energy (DE-FG02-07ER46403)
This publication has 13 references indexed in Scilit:
- An experimental setup for shrinkage evaluation during electric field-assisted flash sintering: Application to yttria-stabilized zirconiaJournal of the European Ceramic Society, 2013
- A newly-developed effective direct current assisted sintering technique for electrolyte film densification of anode-supported solid oxide fuel cellsJournal of Power Sources, 2012
- Densification and enhancement of the grain boundary conductivity of gadolinium-doped barium cerate by ultra fast flash grain weldingJournal of the European Ceramic Society, 2012
- Flash grain welding in yttria stabilized zirconiaJournal of the European Ceramic Society, 2011
- Flash‐Sintering of Cubic Yttria‐Stabilized Zirconia at 750°C for Possible Use in SOFC ManufacturingJournal of the American Ceramic Society, 2011
- Flash Sintering of Nanograin Zirconia in <5 s at 850°CJournal of the American Ceramic Society, 2010
- The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering methodJournal of Materials Science, 2006
- Alumina-based nanocomposites consolidated by spark plasma sinteringScripta Materialia, 2002
- Full sintering of powdered-metal bodies in a microwave fieldNature, 1999
- Microwave Sintering of Solid Oxide Fuel Cell Materials: I, Zirconia‐8 mol% YttriaJournal of the American Ceramic Society, 1992