Variation of Mechanical Property and Microstructure across Sn Solder Joint in Cu/Sn/Ni Structure
Authors:
- 1 January 2010
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 13 (9) , H298-H300
Abstract
A variation in microstructure and mechanical property (microhardness) was observed across the Cu/Sn/Ni solder joint. The microhardness of the Sn solder joint monotonically decreases away from the Cu side toward the Ni side. A coarser shear band occurred in the indentation marks of the solder matrix near the Ni side. The above findings imply that the solder matrix with a hypoeutectic microstructure near the Ni side has lower mechanical strength. The hypereutectic microstructure near the Cu side has higher mechanical strength.Keywords
This publication has 12 references indexed in Scilit:
- Cross-Interaction of Interfacial Reactions in Ni (Au/Ni/Cu)-SnAg-Cu Solder Joints during Reflow Soldering and Thermal AgingJournal of Electronic Materials, 2006
- Kinetic analysis of the interfacial reactions in Ni/Sn/Cu sandwich structuresJournal of Electronic Materials, 2006
- Asymmetrical solder microstructure in Ni/Sn/Cu solder jointScripta Materialia, 2006
- Cross-interaction of under-bump metallurgy and surface finish in flip-chip solder jointsJournal of Electronic Materials, 2004
- Cross interactions on interfacial compound formation of solder bumps and metallization layers during reflowJournal of Materials Research, 2004
- Controlling Ag3Sn plate formation in near-ternary-eutectic Sn-Ag-Cu solder by minor Zn alloyingJOM, 2004
- Study of interaction between Cu-Sn and Ni-Sn interfacial reactions by Ni-Sn3.5Ag-Cu sandwich structureJournal of Electronic Materials, 2003
- Interfacial reactions in the Sn-(Cu)/Ni, Sn-(Ni)/Cu, and Sn/(Cu,Ni) systemsJournal of Electronic Materials, 2003
- Studies of the mechanical and electrical properties of lead-free solder jointsJournal of Electronic Materials, 2002
- Six cases of reliability study of Pb-free solder joints in electronic packaging technologyMaterials Science and Engineering: R: Reports, 2002