Smart Roller: Soft Sensor Array for Automated Fiber Placement
Open Access
- 4 May 2023
- journal article
- research article
- Published by Wiley in Advanced Sensor Research
- Vol. 2 (9)
Abstract
Rollers and wheels are widely used in industry and transportation, but there is seldom direct information about contact forces. A smart roller is introduced which provides real‐time pressure measurements from a soft, elastomer‐coated cylinder. The roller is designed for automated fiber placement (AFP) machines, which are widely used in the aerospace industry to manufacture complex composite parts. For optimum process performance, real‐time feedback is highly desirable for detecting flaws during manufacturing. The sensor replaces the elastomer outer layer of a standard roller with 4 by 13 tactile pixels (taxels) of soft capacitive sensors, which provide more than 1 pF of change in capacitance per taxel over a pressure range of 1 MPa. Sensors are made of silicone and mounted on a flexible printed circuit board on which a microcontroller with Bluetooth‐Low‐Energy collects and transmits capacitance data. The sensor dielectric layer is composed of pillars that increase layer compliance and sensitivity while also providing the stiffness of typical industrial rollers. The ability of the roller to measure real‐time local compaction pressure at typical manufacturing speeds enables the monitoring of spatially‐resolved pressure‐time curves, which can be used to predict and control adhesion.Keywords
Funding Information
- Air Force Office of Scientific Research (FA2386‐20‐1‐4020)
This publication has 15 references indexed in Scilit:
- Effect of compaction roller on layup quality and defects formation in automated fiber placementJournal of Reinforced Plastics and Composites, 2019
- Pressure distribution for automated fiber placement and design optimization of compaction rollersJournal of Reinforced Plastics and Composites, 2019
- An experimental and simulative study on the defects appeared during tow steering in automated fiber placementComposites Part A: Applied Science and Manufacturing, 2018
- Carbon Nanofiber versus Graphene‐Based Stretchable Capacitive Touch Sensors for Artificial Electronic SkinAdvanced Science, 2017
- Simulating Prepreg Tack in AFP Process2017
- Bend, stretch, and touch: Locating a finger on an actively deformed transparent sensor arrayScience Advances, 2017
- Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A ReviewAdvanced Functional Materials, 2016
- Soft dielectrics for capacitive sensing in robot skins: Performance of different elastomer typesSensors and Actuators A: Physical, 2015
- The engineering aspects of automated prepreg layup: History, present and futureComposites Part B: Engineering, 2012
- Durometer Hardness and the Stress-Strain Behavior of Elastomeric MaterialsRubber Chemistry and Technology, 2003