Crystallinity of isothermally and nonisothermally crystallized poly(ether ether ketone) composites
Authors:
- 1 December 1998
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 19 (6) , 689-697
Abstract
PEEK/carbon fiber composites were prepared by a modified diaphragm forming machine under vacuum. The study of the degree of crystallinity versus the differential scanning calorimetry (DSC) heating rate indicated that 50°C/min was an optimal heating rate to suppress the reorganization of the specimens crystallized between 315°C and 255°C and to avoid superheating the specimens. A high volume of fibers constrained the spherulitic growth by an impingement mechanism, which depressed the crystallization rate and reduced the crystallinity. Thus the crystallization was still in process even after 240 min annealing at 300°C. The effect of the cooling rate on the degree of crystallinity was simulated and investigated in DSC at a heating rate of 50°C/min. The results indicated that the cooling rates ranging from 1°C/min to 100°C/min could be divided into five regions that were associated with a high volume of fiber and the crystallization regime. A Time‐Temperature‐Transformation diagram superposed on the Continuous‐Cooling‐Transformation curves allows us to predict the amount of crystallization in different regimes. The data points for the DSC method deviated from the prediction at the cooling rates above 60°C/min because of the recrystallization during DSC heating scans.Keywords
This publication has 28 references indexed in Scilit:
- Thermal stability and nonisothermal crystallization of short fiber-reinforced poly(ether ether ketone) compositesJournal of Polymer Science Part B: Polymer Physics, 1998
- Thermal stability and crystallization kinetics of poly(ether ether ketone)Macromolecular Chemistry and Physics, 1998
- Analysis of crystallization kinetics of poly(ether ether ketone)Journal of Polymer Science Part B: Polymer Physics, 1998
- The Effects of Crystallinity on the Mechanical Properties of PEEK Polymer and Graphite Fiber Reinforced PEEKJournal of Composite Materials, 1987
- Crystallization kinetics of polyetheretherketone (peek) matricesPolymer Engineering & Science, 1986
- Crystallization behaviour of poly(ether-ether-ketone)Polymer, 1986
- Polyetheretherketone (PEEK): Processing‐structure and properties studies for a matrix in high performance compositesPolymer Composites, 1986
- A method for direct assessment of the crystalline/amorphous ratio of polyetheretherketone (PEEK) in carbon fibre composites by wide angle X-ray diffractionEuropean Polymer Journal, 1986
- The effect of physical ageing on the properties of amorphous PEEKPolymer, 1985
- The morphology of poly(aryl-ether-ether-ketone)Polymer, 1983