A 2.5-dB Insertion Loss, DC-60 GHz CMOS SPDT Switch in 45-nm SOI
Authors:
- Mehmet ParlakMPMehmet Parlak
- James F. BuckwalterJBJames F. Buckwalter
- 1 October 2011
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 15508781,p. 1-4
Abstract
This paper presents a single-pole double-throw (SPDT), transmit/receive (T/R) switch operating from DC to 60 GHz. The SPDT switch is based on a series-shunt circuit with broadband input and output matching circuits and is implemented in a partially-depleted, 45-nm silicon-on-insulator (SOI) process. A buried oxide (BOX) layer is demonstrated to minimize substrate coupling. The switch exhibits a measured insertion loss of less than 1.7 dB at 45 GHz and less than 2.5 dB at 60 GHz with an isolation of greater than 25 dB at 45 GHz. To our knowledge, this is the lowest insertion loss demonstrated for an SPDT switch at 60 GHz in a CMOS process. With a control voltage of 1.2 V, the measured P 1dB and IIP3 are 7.1 dBm and 18.2 dBm, respectively. The active chip area is 0.18×0.22 mm 2 .Keywords
This publication has 6 references indexed in Scilit:
- A Compact DC-30 GHz 0.13-um CMOS SP4T Switch2009
- A 94GHz SPST Switch in 65nm Bulk CMOS2008
- $Ka$-Band Low-Loss and High-Isolation Switch Design in 0.13-$\mu{\hbox {m}}$ CMOSIEEE Transactions on Microwave Theory and Techniques, 2008
- Ultra-Compact High-Linearity High-Power Fully Integrated DC–20-GHz 0.18-$\mu{\hbox {m}}$ CMOS T/R SwitchIEEE Transactions on Microwave Theory and Techniques, 2007
- A 0.5-μm CMOS T/R switch for 900-MHz wireless applicationsIEEE Journal of Solid-State Circuits, 2001
- Compact DC-60-GHz HJFET MMIC switches using ohmic electrode-sharing technologyIEEE Transactions on Microwave Theory and Techniques, 1998