Correlating strength of concrete to its early-age temperature rise
- 1 December 2015
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 67 (23) , 1274-1286
Abstract
Compressive strength is the most commonly used property for characterising the performance of concrete materials. In this study, semi-adiabatic temperature evolutions and compressive strength developments of a series of mortar and concrete mixtures were experimentally investigated. In order to predict compressive strength, it was correlated to the initial temperature rise induced by early-age hydration. The results indicate that both properties are strongly dependent on the raw materials and the water to cementitious materials ratio. Estimated results of temperature rise and strength from the modified equations match well with the measured data. A linear relationship between compressive strength and the peak value of temperature rise is developed and presented. The linear correlation exists for all mixture components and proportions of concrete materials in this study. In conclusion, predicting the strength of concrete materials from their early-age hydration-induced temperature evolutions is enabled.Keywords
This publication has 25 references indexed in Scilit:
- Size effect on compressive behaviours of normal-strength concrete cubes made from demolished concrete blocks and fresh concreteMagazine of Concrete Research, 2013
- Simulation of a temperature rise in concrete incorporating silica fumeMagazine of Concrete Research, 2010
- Blending different fineness cements to engineer the properties of cement-based materialsMagazine of Concrete Research, 2010
- A review of early-age properties of cement-based materialsCement and Concrete Research, 2008
- Prediction of compressive strength of fly ash concrete by new apparent activation energy functionCement and Concrete Research, 2003
- Influence of hydration reaction on engineering properties of hardening concreteMaterials and Structures, 2002
- Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregatesCement and Concrete Research, 2001
- Compressive strength development of concrete with different curing time and temperatureCement and Concrete Research, 1998
- Prediction of Adiabatic Temperature Rise in Conventional and High-Performance Concretes Using a 3-D Microstructural ModelCement and Concrete Research, 1998
- Pozzolanic and cementitious reactions of fly ash in blended cement pastesCement and Concrete Research, 1988