Experimental observations of the penetration of spudcan footings in silt
Author:
- 1 August 2012
- journal article
- Published by Emerald Publishing in Géotechnique
- Vol. 62 (8) , 727-732
Abstract
Mobile drilling platforms perform the majority of the world's drilling in water depths up to approximately 120 m. The installation of their large, inverted, conical spudcan footings into fine-grained silt material is considered problematic by an industry that has usually defined the conditions of installation as either undrained in ‘clays' or drained in ‘sands'. This is reflected in current SNAME industry guidelines. Little guidance is provided for calculating the penetration resistance of spudcans in partially drained conditions. The use of full flow-round penetrometers may provide the opportunity to directly correlate spudcan predictions with in situ measurements. Previous centrifuge testing of T-bars and spudcans has shown a similar bearing pressure for installation under undrained conditions in kaolin clay. However, to provide correlation between a penetrating spudcan and penetrometers in soils displaying partially drained conditions, relationships between size, shape and penetration rate are required. This technical note provides an experimental comparison of the ‘in-flight' installation of a T-bar penetrometer and a typically shaped spudcan footing in reconstituted calcareous silt. The experiments were conducted at an acceleration of 100 times that of Earth's gravity (known as 100g) in the drum centrifuge at the University of Western Australia. The primary variable was the rate of installation. The experimental aims were first to accurately measure the change in capacity with normalised velocity for both the T-bar and spudcan, second to compare these silt results to other published experimental data on kaolin clay soils, and third to investigate the relationship between bearing pressure on a T-bar and a spudcan footing.Keywords
This publication has 12 references indexed in Scilit:
- Estimation of intact and remoulded undrained shear strengths from penetration tests in soft claysGéotechnique, 2010
- Recommended best practice for geotechnical site characterisation of cohesive offshore sediments2010
- Catalogue of scaling laws and similitude questions in geotechnical centrifuge modellingInternational Journal of Physical Modelling in Geotechnics, 2007
- Experimental observations of the combined loading behaviour of circular footings on loose silica sandGéotechnique, 2007
- Application of Recent Developments in Terrestrial Soft Sediment Characterization Methods to Offshore Environments2007
- Effect of Penetration Rate on Penetrometer Resistance in ClayJournal of Geotechnical and Geoenvironmental Engineering, 2006
- Cavity Stability and Bearing Capacity of Spudcan Foundations on Clay2006
- Australian frontiers – spudcans on the edge2005
- A comparison of the combined load behaviour of spudcan and caisson foundations on soft normally consolidated clayGéotechnique, 2004
- Evaluating the coefficient of consolidation using penetration testsInternational Journal of Physical Modelling in Geotechnics, 2001