Dense Nanostructured Nickel Produced by SPS from Mechanically Activated Powders: Enhancement of Mechanical Properties
Authors:
Open Access
- 1 January 2013
- journal article
- research article
- Published by Wiley in Journal of Nanomaterials
- Vol. 2013 (1)
Abstract
An investigation was performed to evaluate the potential of the spark plasma sintering process in producing dense nanostructured materials. Microstructured and nanostructured nickel was sintered by SPS starting from nickel powder (APS 3–7 μm) in the as‐received state and after a mechanical activation using a high‐energy ball mill. First, a sintering study to determine SPS processing conditions to reach full densification was carried out with specimens 50 mm in diameter and 10 mm in height. In a second step, an experimental investigation was undertaken with dense nickel disks to generate tensile properties. The tensile tests were performed at a strain rate of 10−3 s−1 with specimens 16 mm in gage length and 4 mm in gage diameter. Tensile ductility in excess of 40% was reached with the microstructured nickel. For the nanostructured nickel, high yield stresses in excess of 600 MPa were measured with a tensile ductility of 30%. These results were analyzed through densification and microstructure measurements.Keywords
This publication has 47 references indexed in Scilit:
- Consolidation/synthesis of materials by electric current activated/assisted sinteringMaterials Science and Engineering: R: Reports, 2009
- In situ synchrotron investigation of MoSi2 formation mechanisms during current-activated SHS sinteringActa Materialia, 2007
- Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEMAdvanced Engineering Materials, 2003
- Tensile behavior and fracture in nickel and carbon doped nanocrystalline nickelMaterials Science and Engineering: A, 2001
- Comparison of attrition milled, nanostructured, powder-compaction techniquesNanostructured Materials, 1999
- Mechanical properties of nanocrystalline nickel produced by electrodepositionNanostructured Materials, 1999
- Synthesis and structural analysis of aluminum nanocrystalline powdersNanostructured Materials, 1998
- Preparation of nanocrystalline yttria-stabilized zirconiaJournal of Materials Research, 1995
- The physics of mechanical alloying in a planetary ball mill: Mathematical treatmentActa Metallurgica et Materialia, 1995
- Processing and mechanical behavior of nanocrystalline FeNanostructured Materials, 1995