An approach to sheet metal forming using discretization techniques
Authors:
- 1 April 1988
- journal article
- Published by Emerald Publishing in Engineering Computations
- Vol. 5 (4) , 327-334
Abstract
The automotive industry is very interested in sheet metal forming simulation using numerical techniques such as the finite element method. A cooperative research program between the Stamping Division of FIAT Auto and the Mechanics Department of the Politecnico di Torino was established with the aim of exploring the present possibilities of these techniques. This paper deals with the simulation of the deep forming of an axisymmetrical component, the axisymmetry being characterized by a double curvature profile, and is considered to be the first feasibility study. A sheet was modelled by fournode axisymmetric elements; the punch, the die and the blankholder were modelled by gap elements. The metal sheet was free to move along the punch and the die edges, with a continuous variation of the boundary conditions. The highly non‐linear problem requires an adequate description through the carefully considered use of the appropriate options of the MARC package (release K2). Moreover, some subroutines were written ad hoc to complete the discretization. Results are presented as strain and stress histories during the stamping process and as total forming force exerted by the punch to deform the sheet. In addition the spring‐back phase was considered in order to calculate the back deformation and the residual stress. Lastly, a comparison of the behaviour obtained with two different kinds of steel are reported.Keywords
This publication has 6 references indexed in Scilit:
- Some developments in the numerical simulation of metal forming processesEngineering Computations, 1987
- Analysis of a Test Method of Sheet Metal Formability Using the Finite-Element MethodJournal of Engineering for Industry, 1986
- A viscous shell formulation for the analysis of thin sheet metal formingInternational Journal of Mechanical Sciences, 1983
- Flow of solids during forming and extrusion: Some aspects of numerical solutionsInternational Journal of Solids and Structures, 1978
- An incremental complete solution of the stretch-forming and deep-drawing of a circular blank using a hemispherical punchInternational Journal of Mechanical Sciences, 1976
- The analysis of axisymmetric forming of sheet metal and the hydrostatic bulging processInternational Journal of Mechanical Sciences, 1964