Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization
Authors:
- Metodi P. YankovMetodi P. Yankov
- Søren ForchhammerSFSøren Forchhammer
Preprint
Abstract
In this paper, probabilistic shaping is numerically and experimentally investigated for increasing the transmission reach of wavelength division multiplexed (WDM) optical communication system employing quadrature amplitude modulation (QAM). An optimized probability mass function (PMF) of the QAM symbols is first found from a modified Blahut-Arimoto algorithm for the optical channel. A turbo coded bit interleaved coded modulation system is then applied, which relies on many-to-one labeling to achieve the desired PMF, thereby achieving shaping gain. Pilot symbols at rate at most 2% are used for synchronization and equalization, making it possible to receive input constellations as large as 1024QAM. The system is evaluated experimentally on a 10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t. standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at 5.46 bits/symbol. It is shown that rate adaptation does not require changing of the modulation format. The performance of the proposed 1024QAM shaped system is validated on all 5 channels of the WDM signal for selected distances and rates. Finally, it was shown via EXIT charts and BER analysis that iterative demapping, while generally beneficial to the system, is not a requirement for achieving the shaping gain.Keywords
All Related Versions
This publication has 18 references indexed in Scilit:
- Impact of 4D Channel Distribution on the Achievable Rates in Coherent Optical Communication ExperimentsJournal of Lightwave Technology, 2016
- Rate Adaptation and Reach Increase by Probabilistically Shaped 64-QAM: An Experimental DemonstrationJournal of Lightwave Technology, 2015
- Low-Complexity Tracking of Laser and Nonlinear Phase Noise in WDM Optical Fiber SystemsJournal of Lightwave Technology, 2015
- Challenges and some new directions in channel codingJournal of Communications and Networks, 2015
- Capacity-Approaching Superposition Coding for Optical Fiber LinksJournal of Lightwave Technology, 2014
- Rate-Adaptive Coded Modulation for Fiber-Optic CommunicationsJournal of Lightwave Technology, 2014
- Coded PDM-OFDM Transmission With Shaped 256-Iterative-Polar-Modulation Achieving 11.15-b/s/Hz Intrachannel Spectral Efficiency and 800-km ReachJournal of Lightwave Technology, 2012
- A Pragmatic Coded Modulation Scheme for High-Spectral-Efficiency Fiber-Optic CommunicationsJournal of Lightwave Technology, 2012
- Capacity Limits of Optical Fiber NetworksJournal of Lightwave Technology, 2010
- Convergence behavior of iteratively decoded parallel concatenated codesIEEE Transactions on Communications, 2001