A semi-active vehicle suspension based on pneumatic springs and magnetorheological dampers
- 7 June 2016
- journal article
- research article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 24 (4) , 808-821
Abstract
Semi-active and active suspensions can improve both ride comfort and handling compared to passive suspensions. The authors have proposed a suspension comprising a pneumatic system capable of changing the stiffness of the suspension and a semi-active magnetorheological damper capable of controlling the suspension damping. Eight configurations of this magnetorheological/pneumatic suspension result from combining two possible stiffnesses (compliant and stiff) and four possible means of producing damping (constant low, constant high, on-off skyhook control and on-off balance control). The minimization of a cost function, which considers both ride comfort and handling, leads to decision maps which indicate the most appropriate configuration depending on vehicle velocity and two pieces of information about the road: the international roughness index and the curve radius. All this information can be gathered from a GPS system and toggling between set-ups is fast, efficient, and easily done by simply opening or closing pipes in the pneumatic system and modifying the current supply in the magnetorheological dampers. The proposed magnetorheological/pneumatic suspension achieves the same roll angle levels as in a comparable passive vehicle while improving ride comfort by reducing acceleration by up to 30%.Keywords
This publication has 40 references indexed in Scilit:
- Quasi-active suspension design using magnetorheological dampersJournal of Sound and Vibration, 2011
- The vibration damping effectiveness of an active seat suspension system and its robustness to varying mass loadingJournal of Sound and Vibration, 2010
- Unbalanced machinery vibration isolation with a semi-active pneumatic suspensionJournal of Sound and Vibration, 2010
- Characterization of Semi-active Control System Dynamics with Magneto-rheological SuspensionsJournal of Vibration and Control, 2009
- An Intelligent Controller Design for Magnetorheological Damper Based on a Quarter-car ModelJournal of Vibration and Control, 2009
- Human simulated intelligent control of vehicle suspension system with MR dampersJournal of Sound and Vibration, 2009
- An analytical model of pneumatic suspensions based on an experimental characterizationJournal of Sound and Vibration, 2008
- Semi-active control of vehicle suspension with magneto-rheological dampersJournal of Sound and Vibration, 2005
- A comparison of semi-active damping control strategies for vibration isolation of harmonic disturbancesJournal of Sound and Vibration, 2005
- A STOCHASTIC OPTIMAL SEMI-ACTIVE CONTROL STRATEGY FOR ER/MR DAMPERSJournal of Sound and Vibration, 2003