DIC‐Based Operational Modal Analysis of Bridges
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Abstract
A new method has been proposed to identify the natural frequencies and mode shapes of a bridge model, in which the digital image correlation (DIC) technique is used to track the dynamic displacement. A key issue in vibration‐based damage detection for a bridge is to determine its modal parameters. It is difficult to use traditional acceleration sensors to obtain the accurate mode shapes of bridges as the sensors are only deployed on a few measurement points of the bridges. In this article, the DIC technique is used to capture the movement of the entire experimental bridge model. A steel truss is used as a bridge model and stimulated by a hammer; its dynamic displacement is recorded by using a digital video camera. The correlation analysis is used to track the displacement of the points of interest, and their displacement time histories are inputted into a modal analysis system; the natural frequencies and mode shapes of the bridge model were obtained by both operational modal analysis (OMA) and traditional experimental modal analysis (EMA) methods. (1) The DIC results are compared with those obtained by a traditional acceleration sensor‐based method; the natural frequencies obtained by the two measurement methods are very close. (2) The DIC results are sensitive to the amplitude of the measured displacement and the shooting distance; small displacement amplitudes and long shooting distance may result in the low quality of the measured time‐history curves, and low‐frequency noise signals might be observed in their power spectral density (PSD) curves, while they can be easily solved by the filtering method in this article. (3) In addition, the first frequencies obtained by EMA and OMA are very close, which validates the applicability of the DIC measurement under ambient excitation. The research has illustrated the feasibility of the DIC method for obtaining the modal parameters of the bridges.Keywords
Funding Information
- Guangdong University of Technology (220410009)
This publication has 37 references indexed in Scilit:
- Vibration Mechanisms and Controls of Long-Span Bridges: A ReviewStructural Engineering International, 2013
- Operational Modal Parameter Identification from Power Spectrum Density TransmissibilityComputer-Aided Civil and Infrastructure Engineering, 2012
- Vibration-based Damage Identification Methods: A Review and Comparative StudyStructural Health Monitoring, 2010
- The use of transmissibility measurements in output-only modal analysisMechanical Systems and Signal Processing, 2007
- Development in vibration-based structural damage detection techniqueMechanical Systems and Signal Processing, 2007
- Digital image correlation analysis of interfacial debonding properties and fracture behavior in concreteEngineering Fracture Mechanics, 2007
- Modal identification of output-only systems using frequency domain decompositionSmart Materials and Structures, 2001
- Comparative study of damage identification algorithms applied to a bridge: I. ExperimentSmart Materials and Structures, 1998
- A Summary Review of Vibration-Based Damage Identification MethodsThe Shock and Vibration Digest, 1998
- Application of an optimized digital correlation method to planar deformation analysisImage and Vision Computing, 1986