Experimental Research of the Structure Condition Using Geodetic Methods and Crackmeter
Open Access
- 3 July 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (13) , 6754
Abstract
The article presents an approach to monitoring the structure’s condition with two measurement methods: the SHM-X crackmeter and the classic geodetic method of determining displacements, supplemented with additional information on the condition of the external environment obtained from thermal images. The study aimed to propose an approach combining geodetic and non-geodetic methods of assessing the condition of a structure and its effectiveness in practical application. The research facility is a public utility building of the Bydgoszcz University of Technology with a reinforced concrete structure. Objects of this type require periodic tests of their constancy. Interpreting the test results and identifying possible dangerous states that may indicate the risk of a construction failure is extremely important. The results presented in the article are an extension of the previous ones, in which several factors that could have a destructive effect on the structure were excluded. Observation of the object showed that only the reinforced construction plate is deformed. The only factor influencing the change in structure geometry is thermal changes. As part of the tests in places where cracks were noticed, the SHM-X crackmeter was used to measure the cracks’ opening. In the geodetic research, measurements of the measurement and control network displacement were carried out, in which the TDRA6000 laser station measurement technology was used. The control points were also placed in places where the width of the cracks was directly observed. The proposed approach, with the applied calculation scheme and supplementing the information with the temperature measurement with thermal images, showed the submillimeter accuracy of the determined 3D displacements of the controlled points. Additionally, the parallel application of these methods gives a complete picture of changes in the structure elements, in which signs of destruction appear under the influence of stress.Keywords
Funding Information
- Narodowa Agencja Wymiany Akademickiej (PPI/APM/2019/1/00003)
This publication has 55 references indexed in Scilit:
- Discrete element analysis of gothic masonry vaults for self-weight and horizontal support displacementEngineering Structures, 2017
- Evolutionary learning based sustainable strain sensing model for structural health monitoring of high-rise buildingsApplied Soft Computing, 2017
- Supporting Historical Structures Technical Condition Assessment by Monitoring of Selected Physical QuantitiesProcedia Engineering, 2017
- Geodetic Monitoring of Deformation of Building Surrounding an Underground ConstructionProcedia Engineering, 2017
- Gb-SAR interferometry displacement measurements during dewatering in construction works. Case of La Sagrera railway station in Barcelona, SpainEngineering Geology, 2016
- The Comparison of Measuring and Computing Results of Construction Vertical DisplacementProcedia Engineering, 2016
- Sizing a geodetic network for risk-oriented monitoring of surface deformations induced by CO 2 injection: Experience feedback with InSAR data collected at In-Salah, AlgeriaInternational Journal of Greenhouse Gas Control, 2015
- Infrared Thermography for Temperature Measurement and Non-Destructive TestingSensors, 2014
- Evaluation of image-based modeling and laser scanning accuracy for emerging automated performance monitoring techniquesAutomation in Construction, 2011
- Use of a commercial laser tracker for optical alignment2007