Numerical investigation on transient flow of a high head low specific speed pump-turbine in pump mode
- 1 November 2015
- journal article
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 7 (6) , 063111
Abstract
Transient process of a pump-turbine, in which the inlet discharge decreases rapidly in pump mode, usually appears due to its frequent switch between pump mode and turbine mode. In order to ensure safe and stable operation, the mechanism of flow characteristics during the transient process was investigated combining numerical and experimental methods. First, steady and unsteady simulations were carried out using the shear-stress transport (SST) k-ω turbulence model under 19 mm guide vane opening. External and internal characteristics under different discharges were presented using numerical simulations based on experimental validation. The results show that the position and area of flow separation as well as appearance of vortices vary with time in the transient process. Finally, the variation of the transient frequency characteristics was obtained through short time Fourier transform. It indicates that main frequencies are blade passing frequency and its harmonic frequencies at the beginning of the transient process, then other complicated frequency components occur as the discharge is reduced, which may come from the vortex motion within the runner.Keywords
This publication has 15 references indexed in Scilit:
- Unsteady simulation and analysis for hump characteristics of a pump turbine modelRenewable Energy, 2015
- Power electronics in hydro electric energy systems – A reviewRenewable and Sustainable Energy Reviews, 2014
- Effect of transients on Francis turbine runner life: a reviewJournal of Hydraulic Research, 2012
- Numerical investigation of the hump characteristic of a pump–turbine based on an improved cavitation modelComputers & Fluids, 2012
- Numerical Simulation of the Transient Flow in a Radial Flow Pump during Stopping PeriodJournal of Fluids Engineering, 2011
- Influence of pump starting times on transient flows in pipesNuclear Engineering and Design, 2011
- The transient flow in a centrifugal pump during the discharge valve rapid opening processNuclear Engineering and Design, 2010
- Performance prediction and flow analysis in the vaned distributor of a pump turbine under low flow rate in pump modeScience China Technological Sciences, 2010
- Numerical Simulation of the Transient Flow in a Centrifugal Pump During Starting PeriodJournal of Fluids Engineering, 2010
- Numerical Analysis of Flow Phenomena Related to the Unstable Energy-Discharge Characteristic of a Pump-Turbine in Pump Mode2005