Device-correlated metrology for overlay measurements
Authors:
Open Access
- 1 October 2014
- journal article
- research article
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanolithography, MEMS, and MOEMS
- Vol. 13 (4) , 041404
Abstract
One of the main issues with accuracy is the bias between the overlay (OVL) target and actual device OVL. In this study, we introduce the concept of device-correlated metrology (DCM), which is a systematic approach to quantify and overcome the bias between target-based OVL results and device OVL values. In order to systematically quantify the bias components between target and device, we introduce a new hybrid target integrating an optical OVL target with a device mimicking critical dimension scanning electron microscope (CD-SEM) target. The hybrid OVL target is designed to accurately represent the process influence on the actual device. In the general case, the CD-SEM can measure the bias between the target and device on the same layer after etch inspection (AEI) for all layers, the OVL between layers at AEI for most cases and after develop inspection for limited cases such as double-patterning layers. The results have shown that for the innovative process compatible hybrid targets the bias between the target and device is small, within the order of CD-SEM noise. Direct OVL measurements by CD-SEM show excellent correlation between CD-SEM and optical OVL measurements at certain conditions. This correlation helps verify the accuracy of the optical measurement results and is applicable for the imaging base OVL method using several target types advance imaging metrology, advance imaging metrology in die OVL, and the scatterometrybase OVL method. Future plans include broadening the hybrid target design to better mimic each layer process conditions such as pattern density. Additionally, for memory devices we are developing hybrid targets which enable other methods of accuracy verification.Keywords
This publication has 8 references indexed in Scilit:
- Overlay accuracy calibration2013
- Quality metric for accurate overlay control in <20nm nodes2013
- Overlay quality metric2012
- Multi-level overlay techniques for improving DPL overlay control2012
- Overlay accuracy fundamentals2012
- Critical dimension scanning electron microscope local overlay measurement and its application for double patterning of complex shapesJournal of Micro/Nanolithography, MEMS, and MOEMS, 2011
- Investigation on accuracy of process overlay measurement2011
- Concerning the influence of pattern symmetry on CD-SEM local overlay measurements for double patterning of complex shapes2010