Study of Hard Chromium Plating from Trivalent Chromium Electrolyte
Authors:
- 7 March 2008
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 373-374, 200-203
Abstract
Hard chromium deposits were prepared from a trivalent chromium plating bath as an alternative to conventional hexavalent chromium deposits. The influences of bath composition on the trivalent chromium electrodeposition process and deposited coating properties were studied. The effects of plating parameters such as current density, bath pH and plating time on structure and morphology of deposited coatings were investigated. Results show that the hard chromium deposits exhibited amorphous structure with thickness of 50-100μm and acceptable quality for functional coatings. The hard chromium deposits exhibited better wear resistance as well as corrosion resistance than that of hexavalent chromium deposits. The hardness of as-deposited chromium coatings is about 600-700HV. Heat treatment could improve the wear resistance and hardness of the hard chromium deposits. The formation of polynuclear coordination compounds from hydroxyl complex ions at high pH is the main disadvantageous factor for the sustained trivalent chromium plating process.Keywords
This publication has 9 references indexed in Scilit:
- Preparation and characterization of Cr–P coatings by electrodeposition from trivalent chromium electrolytes using malonic acid as complexSurface and Coatings Technology, 2006
- Preparation and electrocatalytic properties of Ti/IrO2-Ta2O5 anodes for oxygen evolutionTransactions of Nonferrous Metals Society of China, 2006
- The effect of the Cr and Mo on the physical properties of electrodeposited Ni–Fe alloy filmsJournal of Alloys and Compounds, 2005
- High temperature oxidation of Ni–W coatings electroplated on steelMaterials Science and Engineering: A, 2004
- Characterization of intermediate Cr-C layer fabricated by electrodeposition in hexavalent and trivalent chromium bathsSurface and Coatings Technology, 2004
- On the Possibility of Replacing Standard Chromium-Plating Electrolytes with Sulfate-Oxalate Solutions of Cr(III)Russian Journal of Applied Chemistry, 2003
- Chrome Plating from Sulfate–Oxalate Cr(III) Baths. Structure, Composition, and Corrosion Behavior1Protection of Metals, 2001
- Electrodeposition of Thick Chromium Coatings from an Environmentally Acceptable Chromium (III)-Glycine ComplexTransactions of the IMF, 1999
- Electrodeposition and characterization of amorphous Fe-Cr-P-C alloysJournal of Applied Electrochemistry, 1992