Ion projection lithography: Status of the MEDEA project and United States/European cooperation
Authors:
- 1 November 1998
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 16 (6) , 3150-3153
Abstract
Structure and targets of the European MEDEA project on ion projection lithography as well as related U.S./European cooperation are explained. By assuming 10 μm virtual source size and 1 eV (full width half maximum) energy spread calculations for a multielectrode electrostatic ion–optical system (1.25 m between ion source and stencil mask, ≈1.8 m between mask and wafer) we realize the possibility of 100 nm resolution (line and space) over an exposure field of 22×22 mm2 even when using the MONTEC model for calculating the stochastic blur and when running 3.3 μA He+ ion beam current through the ion–optical column, thus more than twice exceeding target specifications. Thus, for 100 nm resolution and 50% pattern density the raw throughput is ≈12 cm2/s corresponding to >75 WPH (pattern within 80% of 300 mm wafer area).Keywords
This publication has 8 references indexed in Scilit:
- DUV resist UV II HS applied to high resolution electron beam lithography and to masked ion beam proximity and reduction printingMicroelectronic Engineering, 1998
- Space charge effects in projection charged particle lithography systemsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Large-field electron optics: limitations and enhancements1995
- Experimental investigation of stochastic space charge effects on pattern resolution in ion projection lithography systemsJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1994
- Novel electrostatic column for ion projection lithographyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1994
- Ion projector distortion stability and wafer exposures under electronic alignment (“pattern lock”) conditionsMicroelectronic Engineering, 1993
- Progress in ion projection lithographyMicroelectronic Engineering, 1992
- Laser cleaning of wafer surfaces and lithography masksMicroelectronic Engineering, 1991