The analysis of flow behavior of Ti-6Al-2Sn-4Zr-6Mo alloy based on the processing maps
Open Access
- 14 January 2020
- journal article
- research article
- Published by Springer Nature in International Journal of Material Forming
- Vol. 14 (4) , 523-532
Abstract
The paper presents the analysis of hot deformation behavior of Ti-6Al-2Sn-4Zr-6Mo (Ti-6246) alloy using the theory of dynamic material modeling (DMM) based on hot compression tests performed to a total true strain of 1 at the strain rates from 0.01 to 100 s−1 and at the temperatures within the range between 800 and 1100 °C. The processing maps according to the Prasad’s criterion were developed. The analysis of the processing maps allowed for the placement of domains describing the areas of potentially favorable combinations of hot deformation parameters. The microstructure observations of the investigated alloy specimens after hot deformation in stability and instability areas were conducted. The optimal processing parameters for numerical modeling of Ti-6246 alloy forging were selected based on processing maps. After complex analysis of the obtained results, microstructural observations and numerical modeling of forging of selected part, the forging tests of Ti-6246 alloy were realized. The obtained product quality assessment was carried out by computed tomography non-destructive testing.Keywords
Funding Information
- National Science Centre Poland (UMO-2015/19/B/ST8/01079)
This publication has 28 references indexed in Scilit:
- Comparison of slip system activation in Ti-6Al-2Sn-4Zr-2Mo and Ti-6Al-2Sn-4Zr-6Mo under tensile, fatigue and dwell-fatigue loadingsMaterials Science and Engineering: A, 2017
- The Role of the Deformation Conditions in the Evolution of the Microstructure of the Ti-6Al-2Sn-4Zr-6Mo AlloyKey Engineering Materials, 2015
- A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized BasisMetallurgical and Materials Transactions A, 2014
- Materials selection in design of structures and engines of supersonic aircrafts: A reviewMaterials & Design (1980-2015), 2013
- Strain-induced phase transformation during thermo-mechanical processing of titanium alloysMaterials Science and Engineering: A, 2012
- The origins of microtexture in duplex Ti alloysMaterials Science and Engineering: A, 2009
- Characterization of the α↔β transformations in a Ti–6Al–2Sn–4Zr–6Mo (wt.%) alloyMaterials Science and Engineering: A, 2008
- The role of crystallographic and geometrical relationships between α and β phases in an α/β titanium alloyActa Materialia, 2003
- Isothermal subtransus forging of Ti–6Al–2Sn–4Zr–6MoJournal of Light Metals, 2002
- Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242Metallurgical Transactions A, 1984