The influence of wall slip in the measurement of solder paste viscosity
Authors:
- N.N. EkereN.N. Ekere
- D. HeDHD. He
- L. CaiLCL. Cai
- 1 September 2001
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 24 (3) , 468-473
Abstract
The wall slip phenomena is known to have a significant effect on the measurement of the viscosity of dense suspensions. In the measurement of the viscosity of solder pastes the effect of wall slip is such that the measured viscosity (also called the apparent viscosity) is much lower than the true viscosity of the paste. Therefore, correction needs to be applied to the measured viscosity in order to obtain the true viscosity of the solder paste. In this paper, we present work on the modeling of the influence of wall slip on viscosity measurement, and a model for predicting the true viscosity based on measurements using parallel plate viscometer. The apparent viscosity values measured at two different plate gaps, but at the same applied shear rate (also called the apparent shear rate), is used for predicting the true viscosity, the wall slip velocity and the thickness of the boundary slip layer. The model was validated using results from solder paste samples measured at three different plate gaps (H=0.5 mm, 1.0 mm and 1.5 mm). Our results show that the predicted values of the true viscosity using the data measured at any two gaps are in reasonably good agreement. The results also show that the influence of the wall slip is significant and that the ratio of the predicted viscosity to the apparent viscosity decreases with increasing apparent shear rate.Keywords
This publication has 24 references indexed in Scilit:
- Slipping fluids: a unified transient network modelJournal of Non-Newtonian Fluid Mechanics, 2000
- Slip velocity and slip layer thickness in flow of concentrated suspensionsJournal of Applied Polymer Science, 1998
- Slip flow in concentrated alumina suspensionsPowder Technology, 1998
- RHEOLOGICAL CHARACTERIZATION OF NUCLEAR WASTE SLURRIESParticulate Science and Technology, 1996
- Apparent wall slip velocity coefficients in concentrated suspensions of noncolloidal particlesJournal of Rheology, 1995
- A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cureJournal of Non-Newtonian Fluid Mechanics, 1995
- Slip Effects in Capillary and Parallel Disk Torsional Flows of Highly Filled SuspensionsJournal of Rheology, 1989
- Wall Slip Corrections for Couette and Parallel Disk ViscometersJournal of Rheology, 1988
- The shear-induced migration of particles in concentrated suspensionsJournal of Fluid Mechanics, 1987
- Apparent Slip Flow of Polymer SolutionsJournal of Rheology, 1985