Accelerating the Time-Stepping Finite-Element Analysis of Induction Machines in Transient-Magnetic Solutions
Open Access
- 29 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 122251-122260
Abstract
Finite-element analysis (FEA) is one of the most significant tools in the designing and analyzing of electrical machines, which mainly includes the transient-magnetic (TM), magnet-static (MS) and time-harmonic (TH) solutions. The transient-magnetic (TM) solution in FEA is capable of considering both the harmonic effects and eddy-current effects accurately, which makes it suitable for the induction machine (IM) simulation. However, the drawback of the TM FEA for the IM modelling is that it takes some time before reaching the steady state because of the longer numerical transient, which is affected by the inherent electromagnetic time constants of the IM directly. In this paper, a new approach is proposed to reduce the duration of the numerical transient of the IM in the time-stepping FEA so that the steady state can be achieved in a short time. The proposed approach is capable of creating an initial condition close to the final steady state for the simulation by eliminating or reducing the stator and rotor electromagnetic time constants separately. The stator electromagnetic time constant is eliminated by an initial current excitation (obtained by the TH solution or the analytical method) and the rotor electromagnetic time constant is reduced by a locked rotor model at the beginning of the simulation. Then the initial current excitation is switched to a voltage excitation and the locked rotor is turned to the rotating state at proper time. Finally, the proposed approach is tested and proved efficient to reduce the transients by two typical cases (a solid-rotor IM and a squirrel-cage IM) with 2D FEA.Keywords
Funding Information
- China Scholarship Council (201706690032)
This publication has 29 references indexed in Scilit:
- GetDDM: An open framework for testing optimized Schwarz methods for time-harmonic wave problemsComputer Physics Communications, 2016
- Nonlinear Interpolation on Manifold of Reduced-Order Models in Magnetodynamic ProblemsIEEE Transactions on Magnetics, 2015
- Generation of Equivalent Circuit From Finite-Element Model Using Model Order ReductionIEEE Transactions on Magnetics, 2015
- Equivalent Circuit Considering the Harmonics of Core Loss in the Squirrel-Cage Induction Motor for Electrical Power Steering ApplicationIEEE Transactions on Magnetics, 2014
- Numerical analysis of steady-state operation of three-phase induction machines by an approximate frequency domain technique1e+i Elektrotechnik und Informationstechnik, 2011
- Modeling Maglev Passenger Compartment Static Magnetic Fields From Linear Halbach Permanent-Magnet ArraysIEEE Transactions on Magnetics, 2004
- Transient model for induction machines with stator winding turn faultsIEEE Transactions on Industry Applications, 2002
- Acceleration of convergence characteristics of time-stepping FE analysis for rotating machinesIEEE Transactions on Magnetics, 2001
- 3-D field computation: the near-triumph of commercial codesIEEE Transactions on Magnetics, 1996
- Simulation of induction machine operation using complex magnetodynamic finite elementsIEEE Transactions on Magnetics, 1989