Influence of ageing on kinetics and strain-hardening behaviour of duplex stainless steels
- 30 October 2019
- journal article
- research article
- Published by Emerald Publishing in Emerging Materials Research
- Vol. 8 (4) , 588-597
Abstract
In this work, the effect of long-term isothermal heat treatment on the kinetics of sigma-phase precipitation of super duplex steels was qualitatively and quantitatively examined in detail. Microstructural examination showed that the sigma phase was only an intermetallic phase even after ageing for a longer holding time (4500 min). As the ageing time increased, the amount of sigma-phase precipitation also increased. In order to assess the transformation characteristics, the experimental results were fitted with the Johnson–Mehl–Avrami equation. The results showed that the kinetics of sigma precipitation was very sensitive to the holding time at 900°C. Also, in this investigation, the strain-hardening behaviour was evaluated by using Holloman’s model. As the ageing time increased, the tensile strength of the samples also increased because of the sigma-phase precipitation in both the ferritic phase and ferrite/austenite interface. The embrittled ferrite phase was found to be harder than the austenitic phase, and the strain-hardening behaviour of both the austenitic and ferritic phases was found to be monotonic in nature.Keywords
This publication has 18 references indexed in Scilit:
- The Kinetic diagram of sigma phase and its precipitation hardening effect on 15Cr-2Ni duplex stainless steelMaterials Science and Engineering: A, 2018
- Dissolution of alpha-prime precipitates in thermally embrittled S2205-duplex steels during reversion-heat treatmentResults in Physics, 2015
- Time-temperature-precipitation characteristics of high-nitrogen austenitic Fe−18Cr−18Mn−2Mo−0.9N steelMetallurgical and Materials Transactions A, 2006
- Influence of isothermal aging on secondary phases precipitation and toughness of a duplex stainless steel SAF 2205Journal of Materials Science, 2006
- Determination of isothermal transformation diagrams for sigma-phase formation in cast duplex stainless steels CD3MN and CD3MWCuNMetallurgical and Materials Transactions A, 2004
- Initial phase transformation diagram determination for the CD3MN cast duplex stainless steelScripta Materialia, 2004
- Grain refinement of Cr25Ni5Mo1.5 duplex stainless steel by heat treatmentMaterials Science and Engineering: A, 2003
- Microstructure evolution during isothermal annealing of a standard duplex stainless steel type 1.4462Steel Research, 2000
- Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austeniteJournal of Alloys and Compounds, 1999
- Effect of Mo substitution by W on high temperature embrittlement characteristics in duplex stainless steelsMaterials Science and Engineering: A, 1998