Effect of Chip Morphology during Grinding Bearing Steel Using Single Layer Brazed and Galvanic Bonded Cubic Boron Nitride (cBN) Wheel
Authors:
- 27 May 2011
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 26 (8) , 991-996
Abstract
Chip formation in grinding involves high specific energy compared to other machining processes due to high negative rake angle of grains, adverse grinding process parameters and physical–mechanical properties of the workpiece material. This causes excessive friction between chip-grit and chip-bond interfaces as there are no free flow of chip between grits and work surface. It generates high heat, which can have harmful effects on workpiece surface in case of dry grinding. But single layer brazed type (BT) or galvanic bonded (GB) cBN wheel could be the solution for the above mentioned problem, as the protrusion and gap of the grits may be monitored during manufacturing. Unlike conventional grinding, the single layer counterpart produces favorable chips during grinding bearing steel in ductile mode with lesser grinding forces and specific energy. This investigation also shows that the chips of larger volume cannot be accommodated in the intergrit spaces, which are very small in the GB wheel due to dense grit distribution and shorter grit protrusion, whereas, even with such a large chip load, the BT wheel works effectively for wider and uniform spacing and larger protrusion of the grits.Keywords
This publication has 12 references indexed in Scilit:
- A New Model for Grinding Force Prediction and AnalysisInternational Journal of Machine Tools and Manufacture, 2010
- A probabilistic model of the grinding processApplied Mathematical Modelling, 2009
- Specific energy in grinding of tungsten carbides of various grain sizesCIRP Annals, 2009
- Macro-topography effects on dry grinding with CBN wheelsInternational Journal of Mechatronics and Manufacturing Systems, 2008
- Joining of CBN abrasive grains to medium carbon steel with AgCu/Ti powder mixture as active brazing alloyMaterials Science and Engineering: A, 2006
- Chip Formation Mechanisms in Grinding at Low SpeedsCIRP Annals, 2003
- Analysis of grinding quantities through chip sizesJournal of Materials Processing Technology, 1999
- Improved monolayer CBN wheel for load free grindingInternational Journal of Machine Tools and Manufacture, 1992
- On Performance of Brazed Bonded Monolayer Diamond Grinding WheelCIRP Annals, 1991
- On the formation of a quick-stop chip during single grit grindingWear, 1973