On improving the surface finish of 3D printing polylactic acid parts by corundum blasting
- 26 July 2021
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 27 (7) , 1398-1407
Abstract
Fused filament fabrication or fused deposition modeling (FFF/FDM) has as one of its main restrictions the surface quality intrinsic to the process, especially linked to the layer thickness used during manufacture. The purpose of this paper is to study the possibility of improving the surface quality of polylactic acid (PLA) parts manufactured by FFF using the shot blasting technique. The influence of corundum blasting on 0.2 mm layer thickness FDM PLA parts treated with two sizes of abrasive, different exposure times and different incidence pressures. As a result, improvements of almost 80% were obtained in the surface roughness of the pieces with high exposure times, and more than 50% in just 20 s. This technique is cheap, versatile and adaptable to different part sizes and geometries. Furthermore, it is a fast and environmentally friendly technique compared to conventional machining or vapor smoothing. Despite this, no previous studies have been carried out to improve the quality of this technology.Keywords
This publication has 16 references indexed in Scilit:
- INFLUENCE OF POST-PROCESSING ON ACCURACY OF FDM PRODUCTSAdvances in Science and Technology Research Journal, 2017
- Investigation for surface finish improvement of FDM parts by vapor smoothing processComposites Part B: Engineering, 2017
- Adhesive bonding of 3D-printed ABS parts and woodJournal of Adhesion Science and Technology, 2016
- Mathematical modelling of surface roughness for vapour processing of ABS parts fabricated with fused deposition modellingJournal of Manufacturing Processes, 2016
- Finishing of Fused Deposition Modeling parts by CNC machiningRobotics and Computer-Integrated Manufacturing, 2016
- Post processing for Fused Deposition Modeling Parts with Acetone Vapour BathIFAC-PapersOnLine, 2016
- Surface improvement of fused deposition modeling parts by barrel finishingRapid Prototyping Journal, 2015
- Roughness prediction in coupled operations of fused deposition modeling and barrel finishingJournal of Materials Processing Technology, 2015
- Experimental study aiming to enhance the surface finish of fused deposition modeled partsCIRP Annals, 2009
- On the Integration of Layered Manufacturing and Material Removal ProcessesJournal of Manufacturing Science and Engineering, 1999