In-Situ Measurement of Fluid Density Rapidly Using a Vibrating Piezoresistive Microcantilever Sensor Without Resonance Occurring
- 1 November 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 14 (3) , 645-650
Abstract
The Micro Electro Mechanical Systems (MEMS) density sensor is developed to achieve in-situ measurement of fluid density rapidly. The sensor's sensitive chip with a rectangular microcantilever is fabricated using MEMS technology. In the sensitive chip, an Au coil and four piezoresistors are fabricated on the rectangular microcantilever. When the sensitive chip is placed in the uniform magnetic field and the Au coil is powered with alternating input-voltage, the alternating Lorentz force is generated to drive the microcantilever to vibrate. Then, the powered Wheatstone full bridge consisting of four piezoresistors generates alternating output-voltage based on the piezoresistive effect. The sensor is tested when it is immerged in the silicone oil and in air under local atmospheric pressure. According to the experiment results, it is found that the data of alternating input-voltage of Au coil and alternating output-voltage of the Wheatstone bridge have a linear relationship. The linear function can be fitted easily through least-squares fitting to obtain slope and intercept. We also discover that every slope is inversely proportional to the corresponding fluid density. Hence, the fluid density can be measured rapidly by the calculated slope. The experimental results show that the absolute deviations of the measured densities from the reference densities are .Keywords
This publication has 16 references indexed in Scilit:
- Preliminary Study of Resonant Mass Sensors Based on Asymmetrically Gapped CantileversIEEE Sensors Journal, 2010
- Multi-parameter microcantilever sensor for comprehensive characterization of Newtonian fluidsSensors and Actuators B: Chemical, 2008
- A silicon straight tube fluid density sensorJournal of Micromechanics and Microengineering, 2007
- Micromachined resonant multiple gas sensorSensors and Actuators A: Physical, 2005
- A variable temperature, resonant density sensor made using an improved chip-level vacuum packageSensors and Actuators A: Physical, 2003
- Measurement of density and chemical concentration using a microfluidic chipLab on a Chip, 2003
- Simultaneous liquid viscosity and density determination with piezoelectric unimorph cantileversJournal of Applied Physics, 2001
- A low-pressure encapsulated resonant fluid density sensor with feedback control electronicsMeasurement Science and Technology, 2000
- Silicon tube structures for a fluid-density sensorSensors and Actuators A: Physical, 1996
- Fluid density sensor based on resonance vibrationSensors and Actuators A: Physical, 1995