Retention of different CAD/CAM endocrowns bonded to severely damaged endodontically treated teeth: An in vitro study
Authors:
- 1 January 2021
- journal article
- research article
- Published by Medknow in The Journal of Indian Prosthodontic Society
- Vol. 21 (3) , 269-275
Abstract
Aim: Assess the retention of endocrowns fabricated of different CAD/CAM materials. Settings and Design: In vitro - comparative study. Material and Methods: Root canal treated mandibular first molars were prepared in a standardized method. Standardized endocrowns were manufactured using four CAD-CAM blocks: resin infiltrated ceramic (Vita Enamic), partially stabilized tetragonal zirconia (Katana), lithium disilicate ceramic (IPS e.max CAD), and polyether-ether-keton (PEEK, BioHPP). After proper surface treatment, the restorations were cemented using a resin cement (Panavia F2.0) and were connected to a special attachment unit and secured to a universal testing machine. The amount of axial load required to dislodge the restoration from the tooth structure was measured (n = 12, α = 0.05). Failures were classified as adhesive debonding from the tooth structure without damaging the supporting tooth structure and cohesive fracture of the supporting tooth structure Statistical Analysis Used: One-way analysis of variance,Tukey's post hoc test. Results: The retention of Vita Enamic (61 ± 11 N) and IPS e.max CAD (58 ± 9 N) was significantly higher (F = 123, P < 0.01) than Katana (33 ± 13) and Peek restorations (23 ± 11). Vita Enamic and IPS e.max CAD were associated with fractured tooth segments during debonding while Katana and PEEK specimens were adhesively debonded from the remaining tooth structure. Conclusions: Within the limitations of this study, using lithium disilicate ceramics and resin infiltrated ceramics as restorative materials to fabricate endocrowns to restore severely damaged endodontically treated teeth, recorded significantly higher retention values. Meanwhile, using yttrium partially stabilized zirconia and polyether ether ketones for the same purpose recorded a favorable mode failure which avoided the possibility of tooth fracture.Keywords
This publication has 46 references indexed in Scilit:
- Effect of different surface pre-treatments and luting materials on shear bond strength to PEEKDental Materials, 2010
- Crown pull-off test (crown retention test) to evaluate the bonding effectiveness of luting agentsDental Materials, 2010
- Finite element and Weibull analyses to estimate failure risks in the ceramic endocrown and classical crown for endodontically treated maxillary premolarEuropean Journal of Oral Sciences, 2010
- In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasionClinical Oral Investigations, 2009
- State of the art of zirconia for dental applicationsDental Materials, 2008
- Restoring endodontically treated teeth with all-ceramic endo-crowns: Case report2008
- Interfacial characteristics of adhesive luting resins and composites with dentineDental Materials, 2007
- Bond strength of composite luting cement to zirconia ceramic surfacesDental Materials, 2005
- Concise Review Biomaterials & Bioengineering: Meta-analytical Review of Factors Involved in Dentin AdherenceJournal of Dental Research, 2001
- Effect of undercut placement on crown retention after thermocyclingJournal of Oral Rehabilitation, 1990