Seismic Performance of a Full-Scale Two-Story Bolt-Connected Precast Concrete Composite Wall Panel Building Tested on a Shake Table
Authors:
- 1 December 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 147 (12) , 04021209
Abstract
A novel bolt-connected precast concrete wall panel structural system has recently been proposed for low-rise buildings in rural areas. The system features replaceable distributed bolt-connections adjoining walls, floors, and connecting columns fixed in base, enabling the whole system to be demountable and remountable. Previous quasi-static cyclic push-over test results showed an unfavorable punching shear failure of bolted joints without fully mobilizing the strength of the wall panels. Therefore, the connections were strengthened by using high-strength bolts and adjusting the positions of bolts. In order to evaluate the seismic performance of the precast system with the improved connections, incremental dynamic shake table tests were performed on a full-scale two-story building. Seismic demands and capacities of the precast building with connecting columns fixed in base (Model I) and without fixed-base constraints (Model II) were compared. The experimental results highlighted the high capacity of the improved precast system against beyond design-basis earthquakes with a peak ground acceleration of up to 0.8 g. Only slight to moderate damage was observed in terms of cracks at the edges of the door/window openings, similar to those on a cast-in-place structure, followed by cracks on concrete at connections. Although Model I showed higher lateral stiffness and lower seismic fragility, seismic energy was dissipated more evenly throughout the whole structure of Model II, which was proven well suited for low-rise buildings. Insight was given to explain the improvements on the bolt connections and the reinforcing effects of the connecting columns to provide references for the potential application of the proposed precast system.Keywords
This publication has 13 references indexed in Scilit:
- Shake‐Table Testing of a Full‐Scale Two‐Story Precast Wall‐Slab‐Wall StructureEarthquake Spectra, 2019
- Experimental Study on a Novel Dry Connection for a Precast Concrete Beam-To-Column JointSustainability, 2019
- A Demountable Connection for Low-Rise Precast Concrete Structures with DfD for Construction Sustainability-A Preliminary Test under Cyclic LoadsSustainability, 2019
- Experimental Investigation of the Seismic Performance of a Novel Bolt-Assembled Precast Panel Building StructureJournal of Earthquake and Tsunami, 2019
- Seismic performance assessment of low-rise precast wall panel structure with bolt connectionsEngineering Structures, 2019
- Cyclic testing of a full-scale two-storey reinforced precast concrete wall-slab-wall structureBulletin of Earthquake Engineering, 2018
- Demountable Precast Concrete Frame–Building System for Seismic Regions: Conceptual DevelopmentJournal of Architectural Engineering, 2017
- Experimental and numerical investigation of the seismic response of precast wall connectionsBulletin of Earthquake Engineering, 2017
- Cyclic Lateral Testing of Precast Concrete T-Walls in Fast Low-Rise ConstructionACI Structural Journal, 2016
- Subspace Identification for Linear Systems1996