Process Variation and NBTI Resilient Schmitt Trigger for Stable and Reliable Circuits
- 22 August 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 18 (4) , 546-554
Abstract
Negative bias temperature instability (NBTI) is a major time-dependent reliability concern with the pMOS transistor at elevated temperature. NBTI in pMOS is the severe dominating factor of circuit reliability as it increases the threshold voltage with time. In this paper, an nMOS-only Schmitt trigger with a voltage booster (NST-VB) circuit is proposed. The use of only an nMOS transistor in the critical path of the Schmitt trigger circuit drastically reduces the effect of NBTI on the circuit and, hence, improves performance. The proposed circuit is less affected by both inter-die and intra-die process variations in consequence of an nMOS-only structure. Because of NBTI, the increase in delay for the proposed NST-VB circuit is only 0.47% compared to 7.2% and 1.47% for the conventional Schmitt trigger and nMOS inverter, respectively, after the stress time of three years. The proposed NST-VB circuit is also validated with an s27 benchmark circuit from the ISCAS'89 benchmark set and found that it has a lower effect of NBTI compared to CMOS and Schmitt trigger inverter circuits. For the viability of the proposed circuit, figure-of-merit (FOM) is used as a performance metric and it is found that the proposed circuit has 15.11× improved FOM compared to the conventional Schmitt trigger circuit.Keywords
Funding Information
- University Grants Commission (3528/(NET-DEC. 2014))
- Anusandhan National Research Foundation (PDF/2016/000121)
This publication has 20 references indexed in Scilit:
- Contemporary CMOS aging mitigation techniques: Survey, taxonomy, and methodsIntegration, 2017
- Dual threshold voltage and sleep switch dual threshold voltage DOIND approach for leakage reduction in domino logic circuitsMicrosystem Technologies, 2017
- Analysis and Design of the Classical CMOS Schmitt Trigger in Subthreshold OperationIEEE Transactions on Circuits and Systems I: Regular Papers, 2016
- Adaptive Technique for Overcoming Performance Degradation Due to Aging on 6T SRAM CellsIEEE Transactions on Device and Materials Reliability, 2014
- A highly reliable NBTI Resilient 6T SRAM cellMicroelectronics Reliability, 2013
- A 160 mV Robust Schmitt Trigger Based Subthreshold SRAMIEEE Journal of Solid-State Circuits, 2007
- Negative bias temperature instability: What do we understand?Microelectronics Reliability, 2007
- A comprehensive model for PMOS NBTI degradation: Recent progressMicroelectronics Reliability, 2007
- Combinational profiles of sequential benchmark circuits2003
- CMOS Schmitt trigger designIEEE Transactions on Circuits and Systems I: Regular Papers, 1994